Tunze 6095 pulse function stop

[Gabrielcv]

Hello.

I have a problem with my tunze 6095, it has been working correctly, until the pulse power function turns off after a few seconds of starting, and the flow does not return, both blue lights are flashing (main, pulse), The main power function alone works fine.
. Any idea what is going wrong or if it is the controller gone bad.
Thanks
.

 

[rvitko Verified Sponsor]

Sorry, I am only seeing this post now, I rely on getting an email about new posts and need to check into that. How old is this pump? One of the main things that can cause this is a jammed or seized pump does the propeller assembly pull out easily? Does the metal shaft remain firmly fixed in the motor? The shaft stays in the motor and the magnet and blades spin on the shaft. A missing or worn out disk 6055.740 can also be a cause, likewise if it is installed upside down, the disk sits at the base of the shaft and the blure rubber faces down to the motor, the black plastic disk sits in the blue rubber cup facing up to the base of the impeller.

 

[Gabrielcv]

Hi. The pump had 3 years. I do monthly cleaning. The last time i check everything was ok . But I will check again .Thanks

 

[rvitko Verified Sponsor]

Please let me know what you find, warranty is 5 years.