Tunze 6095

[KorL]

I have (3) tunze 6095 for sale. The previous models without built in controllers. They have the standard “C” clamps along with the larger back end magnet for better hold on thicker tanks. Used these on a 200 gallon tank. But sold the tank a few months ago

$120/ each + $14 shipping
Or $325 for all 3 + $14 shipping

7095 controller
$40 + shipping
Or $350 + shipping for all 3 6095 tunze and 7095 controller

 

[Tennsquire]

How old are they? There should be a date stamped on the square portion of the motor block inside the round housing.

 

[KorL]

They don’t have dates on them. One of the 6095’s is at least 3 yrs. And was used off and on during that time when changing tanks and what not. The others I’m not original owner and acquired from others. I switched out all the back magnets to larger round magnets a couple yrs ago when I set up a 200 gallon with thicker walls

 

[KorL]

My apologies one of the 6095 is a 6055 with a wide flow spout

Tunze 6095 $120 + shipping
Tunze 6055 $95 + shipping.

 

[KorL]

 

[Tennsquire]

They don’t have dates on them. One of the 6095’s is at least 3 yrs. And was used off and on during that time when changing tanks and what not. The others I’m not original owner and acquired from others. I switched out all the back magnets to larger round magnets a couple yrs ago when I set up a 200 gallon with thicker walls

They all do. This one was made July, 2012.

 

[KorL]

Oh ok. I check later. I only checked the front of the motor block

 

[KorL]

All sold