UK controlable power strip
- Thread starter Ludders
- Start date
- Tagged users None
Weasel1960
Valuable Member
robsworld78
Valuable Member
Thanks for the plug @Weasel1960. I do have a 6 outlet power bar that UK plugs will fit and you can also use the wifi Kasa HS103, HS110 or HS300, I believe there's a UK version for one of those models.
OP
OP
Ludders
Valuable Member
This was the closest thing I could find...
When I go to install though, there is only the drivers for the HS models you listed.
Do I need to install the specific drivers for whatever wifi enabled power strip I end up going with?
@Willbiker
Last edited:
robsworld78
Valuable Member
They do
They do require a specific driver, reef-pi covers 3 for sure, I don't know if the KP303 works though.This was the closest thing I could find...
When I go to install though, there is only the drivers for the HS models you listed.
Do I need to install the specific drivers for whatever wifi enabled power strip I end up going with?
@Willbiker
OP
OP
Ludders
Valuable Member
I notice this supports the HS300 and the KP303...
https://github.com/python-kasa/python-kasa
I'm going to get one and give it a try and also look in the python-kasa source code when I get chance.
https://github.com/python-kasa/python-kasa
I'm going to get one and give it a try and also look in the python-kasa source code when I get chance.
+1 for the TPLink HS300...
OP
OP
Ludders
Valuable Member
What do you mean? The HS300 drivers work with the KP303?
What is your question? I was merely recommending the TPLink HS300 power strip for Reef-Pi (or in general). I believe there is a driver developed to support it on Reef-Pi already.
OP
OP
Ludders
Valuable Member
Just confirmed the HS300 driver does work with the KP303, so if anyone else in the UK wants to set this up this way, the KP303 is compatible.
Last edited:
robsworld78
Valuable Member
Good to hear, thanks for sharing.
Similar threads
