I've been looking and I think this is the best UV for my smaller nano tank -
www.theaquaticstoreonline.co.uk
I'm guessing I will need a pump with low flow so it will work properly. Looking at the eheim 300 so I can slow the rate right down to minimal.
How do I even set it up? I'm guessing I will have two pipes, an in and an out. I guess I will need the pump on the out pipe as it will need to suck the water through the pipe, into the UV and the back out?
For those that know the evo, could i put the pump in the 1st chamber and then run a pipe either back into 2nd chamber or straight back into the tank?
Now sure how this all works. Will be to battle ostreopsis.
V2 Vectron 120 Nano Sterilizer
Suitable for aquariums up to approx 120 litres/26 UK gal/31 US gal. Maximum flow/hr: 360 litres/90 UK gal/105 US gal. Uses 1 x 6W G6T5 UV Lamp. Dimensions: 300mm (w) x 70mm (d) x 130mm (h) Aquarium UV Steriliser New design, manufactured from impact resistant, translucent polycarbonate. Opposing...
I'm guessing I will need a pump with low flow so it will work properly. Looking at the eheim 300 so I can slow the rate right down to minimal.
How do I even set it up? I'm guessing I will have two pipes, an in and an out. I guess I will need the pump on the out pipe as it will need to suck the water through the pipe, into the UV and the back out?
For those that know the evo, could i put the pump in the 1st chamber and then run a pipe either back into 2nd chamber or straight back into the tank?
Now sure how this all works. Will be to battle ostreopsis.
