Vectra M2 pump, return mode help

[125mph]

I'm running in return mode with the "green" constant speed. I set the speed using mobius to around 70%.

Now I see the green indicator lights show about "70%" on the driver running at around 60 watts according to mobius. When I move the dial nothing happens so I guess it is stuck at 70% setting.

Now when I hit the mode button, suddenly I can use the dial and it seems I can go all the way to 100%. When I dial it to 100%, I am seeing 80 watts on mobius. Does this mean this one mode uses mobius and the next mode is an override? Does the override drop back to the mobius after some time or does it stay there unless I hit mode again?

 

[Gumbies R Us]

Bumping your post!

 

[DemoAllBac]

Sorry to dig up an old thread, but did you ever find an answer to this?
I just bought and installed a Vectra M2 and I'm running into similar problems. I started its setup via mobius, decided I didn't really need a schedule / app for a return pump and decided to just use the controller. But after calibrating it and setting power via the controller, it seems to reset to some mystery power level overnight that I can only guess is what Mobius thinks it should be at.