Directions on how to program, with v-link, to have sunrise or sunset, broken line or solid line. Bring up your current light program. For now we are just learning or you can use this to set up a brand new program. Remember to always save your current program. So bring up your current light program. Go to expert then click Erase All, don't worry if you've saved your program your not going to loose anything and it will not change the settings on your light unless you choose to upload.
So now you should have nothing programed, clean graph page. So on the graph click on a start time, say 0600. Then check each color you want to start at this time. Now under Action click New Point. So now you should have your colors on the graph, remember it the % on the color was 0 they might be at the bottom of the graph and not easy to see, don't worry. So now go to 1300 on the graph and click on the hour then hit New Point again, if it's not highlighted click back on the graph and try again.
So now you have two points. go to the 1300hr and click on it. Then check each color your want to raise the % and raise them for now to 50%. If the line is a broken line and you have East or West first Triangle the light should walk in that direction. If it's a solid line click on the line then hit East of West Triangle. Then go back to the graph and just click on the left portion or right portion of the line or anywhere in the graph, it should change. If not click on the time then on East or West Triangle and it should change. Remember anytime I say click it's within the graph itself.
Once you learn to do this you should be able to make the light walk.
So now you should have nothing programed, clean graph page. So on the graph click on a start time, say 0600. Then check each color you want to start at this time. Now under Action click New Point. So now you should have your colors on the graph, remember it the % on the color was 0 they might be at the bottom of the graph and not easy to see, don't worry. So now go to 1300 on the graph and click on the hour then hit New Point again, if it's not highlighted click back on the graph and try again.
So now you have two points. go to the 1300hr and click on it. Then check each color your want to raise the % and raise them for now to 50%. If the line is a broken line and you have East or West first Triangle the light should walk in that direction. If it's a solid line click on the line then hit East of West Triangle. Then go back to the graph and just click on the left portion or right portion of the line or anywhere in the graph, it should change. If not click on the time then on East or West Triangle and it should change. Remember anytime I say click it's within the graph itself.
Once you learn to do this you should be able to make the light walk.