Waterbox Marine X 110.4

[VanCityReefer]

Been in the hobby for 3+ years. Started with an IM nuvo 20 decided to upgrade to the Waterbox marine x. Bought it on blue Friday way back in November and finally had it delivered this week.

Here's a list of equipment I'll be running:

3X AI prime HD ( had 2 on the IM and got a 3rd from craigslist). Might upgrade to something different...
2x Mp40 (only have one atm cause I'm broke from the tank)
Inkbird temp controller.
2x 200w BRS titanium heater
Sicce Syncra SDC 7.0 (might be a little overkill but I plan on installing a manifold for reactors etc.)
AquaMaxx FC-120 Protein Skimmer
ClariSea SK-3000 Gen 3
Tunze marine eco chic LED for Refugium
Kill A Watt PS-10 Power Strip

I cut out the baffles and sock holders from the sump so I could install the sock roller and set up a fuge.
Thanks for looking, stay tuned!

 

[ShepherdReefer]

Great, looking forward to more.

 

[Struggen]

Any advice for removing the baffles? I am planning to do the same thing with my 110.4 to fit a ClariSea SK-3000 as well.

 

[VanCityReefer]

Any advice for removing the baffles? I am planning to do the same thing with my 110.4 to fit a ClariSea SK-3000 as well.

Yes, use a really sharp, thin razor. Go slow and be patient. Also try to cover the glass on the bottom as much as you can. Cleaning off little bits of silicone can be a pain

 

[VanCityReefer]

Here's an updated picture of the sump with baffles removed and clarisea installed. Also built a controller box to hide all the cables. Repurposed an old tablet to use as a controller screen

 

[Randy’s reef]

I am so confused my 110.4 stand has a board deciding the cabinet into almost half , did yours just not come with it or did you chose not to put it in?

 

[Randy’s reef]

I always wanted a bigger sump but the dang wood dividing the middle of the stand cabinet is preventing me from doing so , but I see yours is just one big open cabinet no divider

 

[Randy’s reef]

Oh nvm this is the dx model , I got the regular :(