What do you put on outlets 4&8 on eb8?

[thedasher]

Wondering what you guys out in outlets 4&8 on your eb8. I was thinking of putting my dosing pump on one and wondering what to out in the other.
Thanks

 

[P-Dub]

Wondering what you guys out in outlets 4&8 on your eb8. I was thinking of putting my dosing pump on one and wondering what to out in the other.
Thanks

Tom's Aqua lifter for pumping from remote ATO reservoir to under-tank reservoir, ATO pump on Tunze under-tank reservoir to sump, air pump for microbubble scrubber, and CO2 solenoid. I have 2 eb8's.

 

[thedasher]

Tom's Aqua lifter for pumping from remote ATO reservoir to under-tank reservoir, ATO pump on Tunze under-tank reservoir to sump, air pump for microbubble scrubber, and CO2 solenoid. I have 2 eb8's.

I have 2 eb8s as well and ATO is going to be one of the 4, I missed that one. Thanks. I may take that other ATO reservoir to under-tank reservoir.
For your ATO's, do you have them programmed to always stay on since they're controlled by their own systems such as the tunze?

 

[P-Dub]

I have 2 eb8s as well and ATO is going to be one of the 4, I missed that one. Thanks. I may take that other ATO reservoir to under-tank reservoir.
For your ATO's, do you have them programmed to always stay on since they're controlled by their own systems such as the tunze?

The Tom's AquaLifter that pumps from my external/remote 20-gallon reservoir to fill the 5-gallon under-tank reservoir is controlled by a float switch in the under-tank reservoir. That float switch is connected to the Apex via a BOB. Normally off. The code for that is...
Fallback OFF
Set OFF
If LwResv OPEN Then ON
If HwSump CLOSED Then OFF
Defer 001:00 Then OFF
If ATOSump_7_4 OFF Then OFF
If Leak CLOSED Then OFF

The Tunze ATO is always on with its code...
Fallback ON
Set ON
If Output NanoBBL_8_4 = ON Then OFF
If Output Return_3_5 = OFF Then OFF
If FeedA 005 Then OFF
If HwSump CLOSED Then OFF
If Leak CLOSED Then OFF