What's a high, medium and low light

Lucas Barros

New Member
View Badges
Joined
Dec 12, 2014
Messages
8
Reaction score
5
Location
Brasil
Rating - 0%
0   0   0
Hey, guys!

I saw in the Tidal Gardens' website something interesting about lighting.
- Low light: translates to about 30-50 PAR
- Medium light: is between 50-150 PAR
- High light: anything over 150 PAR

I have ever heard that sps, for example, must be positioned below high light (something between 350 - 500 PAR, for a good color).
But, in this site, high lighting is anything over 150 PAR.

What's your opinion? 150 PAR is really a high lighting?

This is the link:
https://www.tidalgardens.com/coral/wysiwyg-paint-splatter-trachyphyllia-03.html

Thanks!
 

Andrewalex11

Reef Technology
View Badges
Joined
Jan 27, 2017
Messages
323
Reaction score
270
Rating - 0%
0   0   0
I really personally feel like this topic is extremely opinionated but if you want my opinion I consider >125 PAR low light 150-250 medium light and 275 and greater high light. The way I had came up with these numbers are just off the corals I have what the standard consideration for lighting for them (high, medium, low) and what PAR I have them sitting under
 

pickupman66

5000 Club Member
View Badges
Joined
Aug 10, 2010
Messages
6,032
Reaction score
1,165
Location
Winchester, TN
Rating - 0%
0   0   0
My interpretation is:

- Low light: translates to below 100 PAR
- Medium light: is between 100-300 PAR
- High light: anything over 300 PAR


Rick. what are you using to punch that deep with that much light??
 
OP
OP
Lucas Barros

Lucas Barros

New Member
View Badges
Joined
Dec 12, 2014
Messages
8
Reaction score
5
Location
Brasil
Rating - 0%
0   0   0
I agree with you, guys.
I asked this question, because my tank is a sps dominated and I filled it again 3 weeks ago, due to a hydroid that appeared in a frag that I bought anteriorly.
So, this time, I want try do all the things right.
My tank is 50x22x22 (inches) and I have 2 AI 52. To improve the PAR, I added 4 T5 54W.
The measures that I had with the Apooge's sensor was something about 575 PAR in the top, 250-350 PAR in the middle and 250-300 PAR in the sandbed.

Can I get great colors with this measures? I know that there is a lot of other parameters about this question, but I'm thinking in lighting in this time.

Bellow is the photo of my tank.

 

Rick.45cal

2500 Club Member
View Badges
Joined
Jan 14, 2016
Messages
3,693
Reaction score
8,901
Location
Lakeland Florida
Rating - 0%
0   0   0
My interpretation is:

- Low light: translates to below 100 PAR
- Medium light: is between 100-300 PAR
- High light: anything over 300 PAR


Rick. what are you using to punch that deep with that much light??

8x80W 60" ATI powermodule. With KZ bulbs.
 

saltyfilmfolks

Lights! Camera! Reef!
View Badges
Joined
Feb 25, 2014
Messages
28,739
Reaction score
40,625
Location
California
Rating - 0%
0   0   0
0 par is almost dark. 2000 Par is full sun. My Mh 150w w a 20k radium gives about 875 par at 14in. most corals it seems like 200 par or more. clams have no photoinhibition point. In coral when photoinhibition is exceeded(350par per D. Riddle) the produce more pigmentation. My 55g has 2 ai sols 9in above the water at 70% peak for 8 hrs on a 14hr photo period. I have acros nearly growing out of the water. In the same tank I have Palys and xenia also growing out of the water.

Most coral save acros (and still looking)seem happiest in 200 par range, but that same coral will do fine in 50par or 400.

A friends SPS dom tak, with nems, acros and clams has 4 250w MH 6 in from the water. It maxed out my meter so is therefore more than 2000 par.

0-2000. 350 is high? I think not. And its a much much broader conversation into coral metabolisms and balancing the chemistry and light.

Consider this.https://www.reef2reef.com/threads/h...d-i-dont-know-what-to-do.210035/#post-2401666
 

acropora4u

2500 Club Member
View Badges
Joined
Mar 10, 2012
Messages
2,708
Reaction score
1,195
Location
here
Rating - 0%
0   0   0
i run 3 x reefbreeders photon v2 18" above tank- tank is 24" deep - 48x48x24... i run all blue and UV channels at 75% power from 8:00am - 12:00pm, all channels ( blue, white and UV ) at 75% from 12:01pm to 4:00pmn and then 75% on blue and UV only again from 4:00pm till lights out at 8:00pm... I get 500 par at the top to middle of tank during the peak 4 hrs...
 

IslandLifeReef

Valuable Member
View Badges
Joined
Jul 25, 2017
Messages
2,417
Reaction score
5,986
Location
Florida
Rating - 0%
0   0   0
IMO, the source of the light along with how it is measured, pumps on or pumps off, matter. PAR measurement of an LED, very directional, vs a MH or T5 which is more wide spread and therefore has little shadowing, makes a difference. People turn off their pumps and get the water very calm to see higher PAR numbers. But is this what the coral are really seeing? Most of the time the pumps are running in the tank and the light gets scattered and intensity decreases through reflection and refraction. So, to answer the OP’s second post with their current PAR numbers and type of lights, IMO, your corals will thrive and have great coloration. Just look at the PAR that @WWC runs on their display. Some or most might consider it to be medium to a lower end of high PAR, but the tank is saturated with light.
 
Last edited:

TOP 10 Trending Threads

WHAT AMOUNT OF LIVE ROCK AND SAND SHOULD BE PRIORITIZED FOR OPTIMAL BIODIVERSITY/FILTRATION?

  • 100% live rock + bagged sand

    Votes: 37 27.4%
  • 100% dry rock + 100% live sand

    Votes: 46 34.1%
  • 50/50 live/dry rock, 50/50 live/bagged sand

    Votes: 30 22.2%
  • 75% live rock, 25% live sand

    Votes: 12 8.9%
  • 25% live rock, 75% live sand

    Votes: 10 7.4%
Back
Top