Where to mount need ideas?

[Notsolostfish]

Where i can mount this 25w uv? I cant wrap my head around this. I dont want to drill through the right side of the cabinet, and even if i drill, it wont and i cant close my door.

I cant drill at the back wall, old wood, and the wall is empty. Any ideas? Im genuinely frustrated

 

[Utubereefer]

Can you hang it from somewhere?

 

[Notsolostfish]

Can you hang it from somewhere?

From where thats what im trying to figure out

 

[SixlineRyan]

Depending on how heavy it is (doesn't look too heavy), you could go with some velcro tape: Something Like This

 

[Mach42]

I don't trust any sort of "permanent" tape to hold. 3M command strips fail all the time,esp with any sort of bond that isn't flat to flat or is pulling away from the wall.

I would go with hardware, not "stickyware."

 

[CBonito]

Mount it with the bulb socket up so that if the sleeve cracks you dont get a leak.
That's a big mistake people make...I know a guy.

 

[likemike99]

zip tie it horizontally to the back panel

 

[CBonito]

zip tie it horizontally to the back panel

If the quartz sleeve cracks with it horizontal, it's going to leak all over the place.
If it's vertical, the water will leave the outlet first.

 

[Bartanto]

What’s going on with that cavern like space behind the drains and return? With some braided vinyl tubbing you can stick it wherever you want. Is this a permanent install or just session?

 

[Waters]

I have used a strip of wood that can sit on top of the sump (on the right side for example from front to back) and then mount it to the top of that. Added benefit if it leaks, it leaks directly into the sump. Also can be moved easily if needed since the board isn't permanately attached.