Why is Rowaphos gone from reactor after only one day ?

  • Thread starter Thread starter Idech
  • Start date Start date
  • Tagged users Tagged users None

Idech

2500 Club Member
View Badges
Joined
Feb 21, 2021
Messages
4,808
Reaction score
4,028
Location
Canada
Rating - 0%
0   0   0
First time using a media reactor. I bought a Lifeguard turbo reactor - side flow (medium) for my 150 gallons tank. I filled it with about 100 g of Rowaphos. Phosphates went down the first day so then I ran it 3 hours ON and 3 hours OFF all day. They tested at 0,02 ppm today (0,01 pm yesterday). 0,02 ppm is good for me.

The next day of using the reactor (tonight) I noticed there is no more Rowaphos in the reactor. I know it was gently tumbling in there because I checked it 3-5 times to make sure my schedule was working. I set the pump at lowest setting and the adjustment stick on the reactor at lowest.

Why did it disappear and what should I do fix this ?

Thanks
 
I put filter floss on the bottom and top of the reactor for both Rowaphos and Rox carbon. The particle size is really small and if I didn't do this it would be all over my sump.
There are already sponges that came with the reactor but they are not dense enough.

So I would put filter floss directly on top of the Rowaphos and add my sponge on top ?

Why at the bottom too since the flow is going up ?
 
Most reactors have two sponges, one that goes below the gfo/carbon/etc and one that goes above it to hold everything in place.

The bottom sponge is there to help keep detritus out of the reactor.
 
Most reactors have two sponges, one that goes below the gfo/carbon/etc and one that goes above it to hold everything in place.

The bottom sponge is there to help keep detritus out of the reactor.
Yes, it came with two sponges and I use both but they aren’t doing much it seems.
 
There are already sponges that came with the reactor but they are not dense enough.

So I would put filter floss directly on top of the Rowaphos and add my sponge on top ?

Why at the bottom too since the flow is going up ?
I put it on the bottom to keep it from falling through the sponge. Put the filter floss on top of the bottom sponge and under the top one. But leave some space on top so it can tumble.
 
Weird…I do get a little rowa that will flow through my top sponge sometimes. Do you notice your bottom sponge clogging at all? Sometimes they clog with detritus and the bottom sponge works itself upward making it easier for the gfo to escape from the top.

Another thing that sometimes happens is air bubbles in the reactor cause the gfo to go up and out of the sponge.

If you do use filter floss I would only use it in the top portion as it will more than likely clog very quickly if on the bottom.

Also, I’m sure you are aware but the flow should be just enough for the gfo to tumble at the top layer.
 
Weird…I do get a little rowa that will flow through my top sponge sometimes. Do you notice your bottom sponge clogging at all? Sometimes they clog with detritus and the bottom sponge works itself upward making it easier for the gfo to escape from the top.

Another thing that sometimes happens is air bubbles in the reactor cause the gfo to go up and out of the sponge.

If you do use filter floss I would only use it in the top portion as it will more than likely clog very quickly if on the bottom.

Also, I’m sure you are aware but the flow should be just enough for the gfo to tumble at the top layer.
I've had no issues with clogging on the bottom.
 
I put it on the bottom to keep it from falling through the sponge. Put the filter floss on top of the bottom sponge and under the top one. But leave some space on top so it can tumble.
Thanks ! Should I use some type of product to get rid of the Rowaphos that escaped in the tank ? It’s a bout 4-5 tablespoons.

Do you notice your bottom sponge clogging at all? Sometimes they clog with detritus and the bottom sponge works itself upward making it easier for the gfo to escape from the top.
The bottom sponge looked clean honestly. It is still sitting perfectly on the boot ok of the reactor.
 
Thanks ! Should I use some type of product to get rid of the Rowaphos that escaped in the tank ? It’s a bout 4-5 tablespoons.


The bottom sponge looked clean honestly. It is still sitting perfectly on the boot ok of the reactor.
I use an old maxi jet pump with a hose and suck it out whenever some gets in there.
 
I do see anything, it must be spread out. So I would end some type of product to counter it.

I guess it will just deplete on its own with time ?
If you don’t see it then I wouldn’t worry much.

Depending on where it was in your sump it may have gotten sucked up by the return pump and blown into your DT.
 
If your reactor has an output hose, let that flow into a filter sock which will help in filtering out all the fine Rowa
I don’t use filter socks but I could attach a media bag to it if the filter floss isn’t enough. Thanks for the idea !
 

TOP 10 Trending Threads

HOW WOULD YOU FEEL ABOUT RECEIVING A FISH OR CORAL AS A HOLIDAY GIFT?

  • I’d love one, as long as it’s a species I chose

    Votes: 25 25.3%
  • I’d trust someone who knows my tank to choose

    Votes: 9 9.1%
  • I’d rather get a gift card and pick it myself

    Votes: 39 39.4%
  • I’d prefer gear or supplies instead

    Votes: 2 2.0%
  • Please don’t surprise me with livestock

    Votes: 24 24.2%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new