pick her up from petco she $2.50 and was the only one ... i just had to take her she loves her new 15 gallon pearlweed tank lolDem eyes are bigger than hers head. So smol.
Luck be a Lady
- Build Thread
- Thread starter LadyMac
- Start date
- Tagged users None
OP
OP
LadyMac
Freshwater sage fish whisperer
She’s so cute and tiny!Dropping off this baby betta photo …. Her name is sarafina
tbrown
Nominated Cronie Intern - Might be failing?
Stang67
KEEP CALM AND REEF ON
Partner Member 2024
Midwest Reefer
Reef Pumpkin Carver
Ohio Reefer
R2R Secret Santa 2023
My Tank Thread
Wow so the super rainbow neon galaxy moonbows coming out for rear naming practices apply to bettas as well as corals.
tbrown
Nominated Cronie Intern - Might be failing?
I wish he was mine...Oooh, purdy! His colors are striking
tbrown
Nominated Cronie Intern - Might be failing?
Yes! Just wait, I heard they're releasing an Ultra Rainbow Monochromatic Fiji Foxface soon from Biota.
pshh we're not working on foxface yet but this did give me an idea for our April Fool's post
tbrown
Nominated Cronie Intern - Might be failing?
Sounds awesome! I love me some Biota fish for sure.
Just wanna drop a 2 week update pic who knew bettas grow quickDropping off this baby betta photo …. Her name is sarafina
danieyella
unfriendly local swamp witch
That second one, oh my
Yep got me started another addiction loll
tbrown
Nominated Cronie Intern - Might be failing?
I believe those are Galaxy.
OP
OP
LadyMac
Freshwater sage fish whisperer
lol yes. Yes they do.
Nemo Galaxy dumbo feather tail super halfmoon is my favorite by FAR.
OP
OP
LadyMac
Freshwater sage fish whisperer
Sorry for being absent. I’ve been in so much pain and just plain ole blah.
I had the day off today so finally decided to stop putting those waterchanges off on the reef.
Yesterday all the smaller tanks got theirs done, leaving the reef and the macs.
And I think the Dino’s are still trying to come back. Sigh.
The digitata has been closed and may be dead. We know the Duncan is. I’ll pull the skeleton today. Zoas, GSP, Kenya tree and the leafy algae (and the non leafy green stuff) seem to be doing well. The toadstool is strange. It opens for a few days, closes, sheds and repeats. But it seems to shed as much as it’s open lol. Maybe the water change will perk it up and NOT the dinos.
My skimmer is failing, it not really producing the bubbles like it should. It’ll either overflow the cup or just not fill it even when I clean it. Impeller looks great still, magnet is strong and it does seem to still spin as well as it should. So idk.
Im seriously thinking that, if I can find a better tank for Atlas (with a lid) converting the 35 into the reef. While it’ll not have a sump I can get a HOB skimmer and I won’t be losing too much of a footprint. I think I have flow issues with how the overflow is setup.
Oh also, I think my male albi is planning to release some fry today he’s out and about but very much wants to be left alone. lol.
Pics during the waterchange and of the flex
I had the day off today so finally decided to stop putting those waterchanges off on the reef.
Yesterday all the smaller tanks got theirs done, leaving the reef and the macs.
And I think the Dino’s are still trying to come back. Sigh.
The digitata has been closed and may be dead. We know the Duncan is. I’ll pull the skeleton today. Zoas, GSP, Kenya tree and the leafy algae (and the non leafy green stuff) seem to be doing well. The toadstool is strange. It opens for a few days, closes, sheds and repeats. But it seems to shed as much as it’s open lol. Maybe the water change will perk it up and NOT the dinos.
My skimmer is failing, it not really producing the bubbles like it should. It’ll either overflow the cup or just not fill it even when I clean it. Impeller looks great still, magnet is strong and it does seem to still spin as well as it should. So idk.
Im seriously thinking that, if I can find a better tank for Atlas (with a lid) converting the 35 into the reef. While it’ll not have a sump I can get a HOB skimmer and I won’t be losing too much of a footprint. I think I have flow issues with how the overflow is setup.
Oh also, I think my male albi is planning to release some fry today
he’s out and about but very much wants to be left alone. lol. Pics during the waterchange and of the flex
OP
OP
LadyMac
Freshwater sage fish whisperer
Reef tank pics to keep my mind off the day
I was told that the kessil 360we isn’t strong enough for a BTA… but I was under the impression that it was? I want to try again but idk. I do not wanna kill another nem haha. Oh and yeah idk if the digi is recovering or not. I see some red on the side but I also know the Dino’s are here again so it could be that.
Also the macs are mad because I changed the light. This one is brighter, and comes in earlier lol. But my plants are suffering so I have to have a decent light.
Enjoy
I was told that the kessil 360we isn’t strong enough for a BTA… but I was under the impression that it was? I want to try again but idk. I do not wanna kill another nem haha. Oh and yeah idk if the digi is recovering or not. I see some red on the side but I also know the Dino’s are here again so it could be that.
Also the macs are mad because I changed the light. This one is brighter, and comes in earlier lol. But my plants are suffering so I have to have a decent light.
Enjoy
OP
OP
LadyMac
Freshwater sage fish whisperer
3D printer friends. What causes this?
We have leveled manually and with the printer. For some reason it’s just mostly this one side. Urg.
I just want a feed cover
We have leveled manually and with the printer. For some reason it’s just mostly this one side. Urg.
I just want a feed cover
Projects with Sam
5000 Club Member
not enough squish on the first layer or that side of the printer gets the drafts. Or, the bed was greasy from all those grilled cheese sandwiches.3D printer friends. What causes this?
We have leveled manually and with the printer. For some reason it’s just mostly this one side. Urg.
I just want a feed cover
OP
OP
LadyMac
Freshwater sage fish whisperer
lol I wish I thought to grill some sammiches. Draft is very possible. This thing confuzzled me. I’m trying to print one more time but I’m sick of wasting filament. I don’t have a local source and don’t know what to actually get. This is PLA+
Similar threads
