- Joined
- Jul 27, 2016
- Messages
- 614
- Reaction score
- 418
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Ok. Tried this. But what I really need is more the skimmer to delay turning on by two minutes after 10 min of feed pause with return pump off. I also feed at 7pm for 10 min where return pump and skimmer are off for 10min. I also would like a 2min Delay on skimmer once return pump turns on. Appreciate the help
Thanks!Hi have this working on my system and works flawlessly. I will only go back home next Friday but I will try to find the post here where I was taught how to do it.
Ok want to make sure I get this correct
Maxi doser 1 run 15 minute drain the water based on a timer. (Drain)
Max doser 2 run after the time above elapses and fill to sensor tells it to turn off. (Fill)
I assume you want ato not to run at this time also or is that already working for you without any issue?
The way I would test first
Timer 1: 10:00pm to 10:15pm and 10:00am to 10:15am Switchmode: normal . All days checked.
Timer 2: 10:15pm and 10:15am Switchmode: event start. All days checked.
Doser 1 "Fill" Level monitoring off . Switch Channel Index 7
Doser 2 "Drain" Level monitoring off . Switch Channel Index 6
PL:
G1: Dosing Pump 2 And Timer 1
control circuit on the level sensor Control #2 : auto top off #1, Timer 2 active 0.00.00
Switch Channels:
S6: PL1
S7: fill water ATO Only #2
For your normal ATO
I supose you have it like Controll #1 auto top off #1 always active
G2 Timer 1 inverted and Fill water 2 inverted
G3 Fill water 1 and G2
Socket for your normal ATO pump function PL3
I have not tested this - but I would start here
Sincerely Lasse