Can you provide any more info on the wire conduit you used? Trying to find something similar for my stand. Everything looks great
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Can you provide any more info on the wire conduit you used? Trying to find something similar for my stand. Everything looks great
Love the black and white plumbing.making some progress.... Got the 20" Synergy Reef Overflow rough plumbed into the sump!
Hello, does both of the 90s need to be drilled for venting? Hoping to have the 20" in my hands from you all in a few days.Almost filled with water. Started adding salt tonight. Should be full in the morning.
Got the 20" Synergy Reef Overflow plumbed and ready. Here is how we plumb inside the rear box on ours. We use 2 x 1.5" ABS Street ELs, 2 x 1.5" ABS sweep 90's and 1 x 2" x 1.5" reducer for the top of the emergency drain. For the pipe we used 1.5" ABS. We found all of the pieces at Lowes. Here is a picture of the built pieces.
You need to drill a 1/4" hole in the top of both of the 90's for air siphon breaks.
Here is the inside of the rear box after putting in the components. I do NOT glue any of these pieces, just press fit them.
Updates!!
@mixer911 doesn't love us....
Hello, does both of the 90s need to be drilled for venting? Hoping to have the 20" in my hands from you all in a few days.
Very nice setup can you tell me the measurement of the holes were they were drilled for the overflow and how low is the water level at
Thanks
Eric
@revhtree Wow I have been neglecting this thread! Sorry guys, we've been crazy around here this summer. Working on a huge new product release for MACNA and it has been taking all of my extra time.
The tank is doing ok. Could be better, but going thru growing pains. While I was out of town for about 10 days my clam decided to die. This pretty much nuked all my sps. Tank went thru another mini cycle after that and it recovering now. Most of my LPS survived as did all the fish. I also cannot get my nitrate levels to go down. THey are way over 100 and doing multiple water changes every week is not any fun. I just put some biopellets back online yesterday to see if I can combat the nitrate with these.
@Bracka345 Yes the holes are important to stop air locks from forming in your plumbing. Also on the secondary it is a partial siphon so it needs the air to balance the flow.
Hey Eric,
@ReeferEric Our drilling template will have the measurements that you need. http://www.synergyreef.com/Manuals/20 Inch Overflow Drilling Template.pdf
The water level is about 1" below the top of the inside eurobrace.[/QUOTE
Thanks man is that how you set yours up im setting up a tank and trying to figure out how high or low I want the water level.
Yes sir! Thanks. More details soon!My goodness your system is looking fabulous...is that a calcium reactor?, I'm gonna need one eventually.
Beautiful man!