Thanks again for everyone's input. I ordered Red Sea Pro for Nitrate, Calcium, Alk, and Magnesiun. Hanna for phosphate. Got a good deal only $67 with shipping for all of the Red Sea Pro kits that I ordered. New build thread to follow this weekend.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Did you have any problem calibrating you PH probe on your ReefKeeper? I have the ReefKeep lite, went through the calibration process like they instruct. But after I went back to the main screen, it reported the ph was 8.7 and I still had it in the 10.0 ph packet. I'm pretty sure that I saved the calibration properly after doing the cal using the 7.0ph, then the 10.0ph packets.Wow. Thanks for your input Windy.
I use Hannah checkers for alkalinity and phosphate. Salifert for calcium and magnesium. My reefkeeper does pH and salinity.
Thanks for the quick reply!I have never had an issue with calibrating the pH probe on my reef keeper. And it actually does a really good job of staying calibrated.
One more question; how often do you need to recalibrate the ph probe?I have never had an issue with calibrating the pH probe on my reef keeper. And it actually does a really good job of staying calibrated.
Thanks again for this info. I'll try what you suggested.I would try calibrate it again. Unfortunately calling them is not using the best solution as their tech support is not very good. However their forum is usually pretty good about helping people out it just may take a day or two.
Thanks again for this info. I'll try what you suggested.
(I picked up a packet of 7.0ph solution and a packet of 10.0ph solution just incase I did try to recal the probe.)
Allen
Yes, the Reefkeeper SL1 module enables you to connect the PH probe to the ReefKeeper control system.So to track PH on a ReefKeeper what is needed? I have a ReefKeeper Lite and as I understand it I have to purchase the SL1 correct?
Yes, the Reefkeeper SL1 module enables you to connect the PH probe to the ReefKeeper control system.
Allen
May I know where you ordered? I made all my test in the store at the moment but I definitely want to do it on my own, thx