20230926_180324.jpg

00W's AIO Smorgasbord

Aquarium Profile and Equipment

What type of saltwater aquarium is this?
Mixed Reef
Total Water Volume
115
When did you start this tank?
Jun 16, 2015
What is your aquarium made of?
Glass
Aquarium Length (inches)
48
Aquarium Width (inches)
18
Aquarium Height (inches)
24
Aquarium Overflow/Drain
Drain Style (durso, herbie, etc)
Aquarium Sump
YES
Sump Water Volume
20
Aquarium Stand
Wood
Aquarium Controller
NO
Protein Skimmer
NO
Protein Skimmer Make and Model
Lifereef vs3-24
Aquarium Reactors
  1. None
Return Pump
Eheim compaction 3000
What types of equipment are you using for water flow and circulation?
  1. Powerhead
  2. Wavemaker
Water Flow and Circulation Equipment List
Jebao OW 20 x2, OW10, Jebao 1300, 2 sicce small WaveMaker.
Aquarium Lighting
  1. T5 Fluorescent
  2. Natural Sunlight
Lighting Equipment List
Odyssea T5 HO fixture
Lighting PAR and Goals
Low
Dosing Equipment Detail
None
Auto Top Off or ATO
NO
Aquarium Heating and Cooling
  1. I am using a heater or heaters
Water Temperature
77
Heating and Cooling Equipment Detail
Eheim 300w with ink bird controller

Aquarium Water Chemistry and Parameters

pH Level
8.3
Specific Gravity
1.027
Nitrate or NO3
19
Phosphate or PO4
1.12
Calcium
440
Alkalinity
7
Magnesium
1300
Salt Brand
Red sea blue bucket
Trace Element Dosing
Kent essential elements

Aquarium Natural and Mechanical Filtration

Substrate
Bare Bottom (BB)
Substrate Level
No Substrate
Live Rock
75
Live Rock Type
Unknown
Nutrient Export
  1. Protein Skimmer
  2. Filter Sock
Water Changes
YES
Water Change Details
10% every Monday

Aquarium Tank Inhabitants (fish, coral, invert etc.)

Fish List
  1. Angelfish
  2. Clownfish
  3. Surgeonfish Tang
  4. Other Predatory
Total Fish
4
Coral List
  1. Zoanthids
  2. Soft Coral
  3. Mushroom Coral
  4. Other
Total Corals
6
Invert List
  1. Anemone
  2. Snails
  3. None
Total Inverts
0
Livestock Detail
Have a trigger which is not listed.
Livestock Quarantine
  1. No Quarantine

Aquarium Nutrition (fish, coral, invert etc. feeding)

Fish Feeding Frequency
Multiple Daily Feedings
Coral Feeding Frequency
Do Not Feed Coral Directly
Fish and Coral Feeding
  1. Flake
  2. Pellet
  3. Frozen
  4. Algae Strips
  5. Other
Auto Feeder
NO

Additional Aquarium Information

What do you think are the keys to your success in reefing?
Patience
just ordered 2 maxspect 350 gryes and cables for the hydros since when hydros gets here it does not support maxspect old 300 models...augh !!!
It doesn't support the CE Editions either, which is what I have.
 
cloud edition ?
The Maxspect XF330 and XF350 came in two versions the first version used a different controller and works with Hydros via cable and the wave engine replaces the controller. According to the Hydros site, the wave engine only supports the original version not the Cloud Edition which, I think, is the only one they sell now. Not sure what the difference is as I never bought the Hydros after I read the wave engine specs. It may work for all I know but the specs say no.

From the wave engine spes:

**Only the original first-generation (non-cloud) Maxspect Gyre Series 300 pumps are compatible.

Thought I should point it out, just in case.
 
It doesn't support the CE Editions either, which is what I have.
hey . I did some research, reached out to a few people and have told me that they do not use the maxspect controller and they have no issues with hydros wave engine using XF330/350 cloud edition.
 
hey . I did some research, reached out to a few people and have told me that they do not use the maxspect controller and they have no issues with hydros wave engine using XF330/350 cloud edition.
Good to know.

I considered the Hydros but since I already had the Cloud Editions I didn't want to waste my money. I always thought it was a little strange that they would not work. Maybe it doesn't support one of the functions or something but I have a hard time believing that they changed something internal to the pump.

Please let me know after you hook it up. I'm still considering some Hydros and if I can use my existing pumps without issue it would help with my decision. Thanks.
 
I want to say I love the wave engine and no way I want to change it. The main question is, will the new cloud gyres work with the Hydros wave engine? I have no interest in the new cloud controller as its a waste for me.
Just heard back from the folks at Maxspect and they confirmed that it will work with WaveEngine :)
 
I just found the above on the forum...so I copied to share with you...
People are saying the gyres are the same but updated versions of the old 300 series and now people saying they are using these old ones as well...guess I will find out once it all gets here...
...IT is the controller that you can not use with the hydros...whicj makes sense...
But for sure it does not support my two mp40 so these will be getting sold.
 
my guess is that certain co are paying to be listed as a working item with the hydros or any other product out there. My guess other co such as maxspect are not paying ...or my guess is that ice cap has some sort of deal to be pushed as the gyre that works...
My issue is my tank is 3/4 acrylic and icecap only goes to 5/8 and that must be a license deal they have with maxspect. they can use some of their design but can't go over 5/8 inch ..
 
I just found the above on the forum...so I copied to share with you...
People are saying the gyres are the same but updated versions of the old 300 series and now people saying they are using these old ones as well...guess I will find out once it all gets here...
...IT is the controller that you can not use with the hydros...whicj makes sense...
But for sure it does not support my two mp40 so these will be getting sold.
Thanks again, I suspect it has nothing to do with the pumps but that the wave engine may not support all of the tuning that the cloud edition controller offers. Not a big deal to me as long as I can get decent, programable flow. It is hard for me to put into words just how much I dislike the Maxspect App. I've used it for a year or so and not once have I not had to go back in to it because it is undocumented (other than some short wordless video clips) and not, at least to me, intuitive. It is worth it to me to buy a Hydros just to never see that app again.
 
my guess is that certain co are paying to be listed as a working item with the hydros or any other product out there. My guess other co such as maxspect are not paying ...or my guess is that ice cap has some sort of deal to be pushed as the gyre that works...
My issue is my tank is 3/4 acrylic and icecap only goes to 5/8 and that must be a license deal they have with maxspect. they can use some of their design but can't go over 5/8 inch ..
I don't know if it is true or not but I read somewhere the Maxspect actually makes all of heads for themselves, IceCap and AI.
 
Thanks again, I suspect it has nothing to do with the pumps but that the wave engine may not support all of the tuning that the cloud edition controller offers. Not a big deal to me as long as I can get decent, programable flow. It is hard for me to put into words just how much I dislike the Maxspect App. I've used it for a year or so and not once have I not had to go back in to it because it is undocumented (other than some short wordless video clips) and not, at least to me, intuitive. It is worth it to me to buy a Hydros just to never see that app again.
yes I agree I have the old max 300 and the controller is a pain in the a to program and the screen is to small and then half the time it does not do what I want. I cant get them to alternate no matter how I program them...so this wave V2 is my hope ...
 
I have the XF350 and an IceCap Jump 2K running on my Hydros WaveEngine. Not sure if it's CE Maxspect or not - I got them secondhand. The IceCap came as a combo with the WaveEngine - same box and everything - so it is made for it for sure.
 
I don't know if it is true or not but I read somewhere the Maxspect actually makes all of heads for themselves, IceCap and AI.
lol...just like flat screen tv's, only the name outside is what is different most parts are made only in a few places and the tv makers just buy guts and formulate their own idea of how things should work with parts made from other places. same with dishwashers, I know Jen Air is maytags top of the line product...Girl just got me a few weeks ago for a jen air 2600.00 lol she gets dishwasher I get hydros...but I pay for everything hahahah
 
I have the XF350 and an IceCap Jump 2K running on my Hydros WaveEngine. Not sure if it's CE Maxspect or not - I got them secondhand. The IceCap came as a combo with the WaveEngine - same box and everything - so it is made for it for sure.
been reading Xf 330/350 etc are CE...
 
I have the XF350 and an IceCap Jump 2K running on my Hydros WaveEngine. Not sure if it's CE Maxspect or not - I got them secondhand. The IceCap came as a combo with the WaveEngine - same box and everything - so it is made for it for sure.
thanks for the information...appreciate it...when the tubbs is big enough I will give ya a piece...FREE buddy
 

TOP 10 Trending Threads

As a buyer, how important are auctions to you on the NEW market?

  • As a buyer I like them

    Votes: 33 32.4%
  • As a buyer I don’t care for them

    Votes: 42 41.2%
  • I don’t care either way.

    Votes: 27 26.5%
Back
Top
Home
Post thread…
Market
What's new