20230926_180324.jpg

00W's AIO Smorgasbord

Aquarium Profile and Equipment

What type of saltwater aquarium is this?
Mixed Reef
Total Water Volume
115
When did you start this tank?
Jun 16, 2015
What is your aquarium made of?
Glass
Aquarium Length (inches)
48
Aquarium Width (inches)
18
Aquarium Height (inches)
24
Aquarium Overflow/Drain
Drain Style (durso, herbie, etc)
Aquarium Sump
YES
Sump Water Volume
20
Aquarium Stand
Wood
Aquarium Controller
NO
Protein Skimmer
NO
Protein Skimmer Make and Model
Lifereef vs3-24
Aquarium Reactors
  1. None
Return Pump
Eheim compaction 3000
What types of equipment are you using for water flow and circulation?
  1. Powerhead
  2. Wavemaker
Water Flow and Circulation Equipment List
Jebao OW 20 x2, OW10, Jebao 1300, 2 sicce small WaveMaker.
Aquarium Lighting
  1. T5 Fluorescent
  2. Natural Sunlight
Lighting Equipment List
Odyssea T5 HO fixture
Lighting PAR and Goals
Low
Dosing Equipment Detail
None
Auto Top Off or ATO
NO
Aquarium Heating and Cooling
  1. I am using a heater or heaters
Water Temperature
77
Heating and Cooling Equipment Detail
Eheim 300w with ink bird controller

Aquarium Water Chemistry and Parameters

pH Level
8.3
Specific Gravity
1.027
Nitrate or NO3
19
Phosphate or PO4
1.12
Calcium
440
Alkalinity
7
Magnesium
1300
Salt Brand
Red sea blue bucket
Trace Element Dosing
Kent essential elements

Aquarium Natural and Mechanical Filtration

Substrate
Bare Bottom (BB)
Substrate Level
No Substrate
Live Rock
75
Live Rock Type
Unknown
Nutrient Export
  1. Protein Skimmer
  2. Filter Sock
Water Changes
YES
Water Change Details
10% every Monday

Aquarium Tank Inhabitants (fish, coral, invert etc.)

Fish List
  1. Angelfish
  2. Clownfish
  3. Surgeonfish Tang
  4. Other Predatory
Total Fish
4
Coral List
  1. Zoanthids
  2. Soft Coral
  3. Mushroom Coral
  4. Other
Total Corals
6
Invert List
  1. Anemone
  2. Snails
  3. None
Total Inverts
0
Livestock Detail
Have a trigger which is not listed.
Livestock Quarantine
  1. No Quarantine

Aquarium Nutrition (fish, coral, invert etc. feeding)

Fish Feeding Frequency
Multiple Daily Feedings
Coral Feeding Frequency
Do Not Feed Coral Directly
Fish and Coral Feeding
  1. Flake
  2. Pellet
  3. Frozen
  4. Algae Strips
  5. Other
Auto Feeder
NO

Additional Aquarium Information

What do you think are the keys to your success in reefing?
Patience
Im definitely going to have to Pickford brain about that Rock. You mentioned it yesterday and I made a mental note to talk to you about it. Do you spot, broadcast, or feed it both ways.
Hit me up and I’ll explain it
 
I have a question for the more handy people here (lol)

So I am having someone quote me on replacing my water heater and I was going to ask him give me a quote to hang my RODI unit under my sink and add a diverter valve to make it easier. I assume I want the black line which is the drain line to be plumbed directly down the drain. Is there anything else I should ask him to do for extra precautions or I should be gucci with just that instructions. I have the BRS RODI Unit with just three lines, red for inlet water, blue for good water, and black for waste water.

Also does anyone know if this is safe to use in an aquarium?
PLASKOLITE 4 ft. x 2 ft. Suspended Egg Crate Light Ceiling
https://www.homedepot.com/p/PLASKOL...Crate-Light-Ceiling-Panel-1199233A/202025149?https://www.homedepot.com/b/PLASKOLITE/N-5yc1vZ6kw
Sorry for all the questions lol
That’s what I use for my frag racks
 
Just finished adding 50 lbs of live rock and 90 lbs of live sand. This old man is beat but beer got me through it. I added my gsp island as canary in the coal mine. Complete tank transfer tomorrow, wish me well.
Best of luck to you tomorrow my friend. You've got this.
 
Do you have a acrylic tank that is in service , I spoke with Lowell yesterday and he used to build them , my question is for someone else who actively have a unit and to tell me how difficult it is to keep it clean . My issues is with scratching and yellowing .
Yes, my Lagoon 100 is acrylic and I've had two 55 gallon acrylics. @TheWB has a tank nearly identical to mine that is also acrylic.

Quick response, good quality acrylics don't yellow. They can scratch but truthfully I don't think there is a big difference between a quality acrylic and a low-iron glass tank as far as scratch resistance. Also acrylics seem to hide their scratches a little better. The real key is a good fabricator that uses quality acrylics. A quality acrylic also shouldn't craze. Besides that many scratches can be sanded out which isn't possible with a glass tank.

I've only retired one tank due to scratches, a 15 gallon Waterbox low-iron glass tank. I would say that you want to use a reputable acrylic fabricator for an acrylic tank as a few of the mass-market acrylic tanks are not as well made as they could be.

Cleaning is a little different as you use plastic-edged scrappers, melamine sponges (like magic erasers), and acrylic safe pads/cleaners instead of the stuff you are used to. I'd say it's a little more work if you let things go but it isn't much harder.
 
Do you have a acrylic tank that is in service , I spoke with Lowell yesterday and he used to build them , my question is for someone else who actively have a unit and to tell me how difficult it is to keep it clean . My issues is with scratching and yellowing .
Yellowing is not a thing with cell cast acrylic. It is an urban legend spread by glass tank builders in an effort to distract people from the green cast from glass panels. Acrylic is many times clearer than glass of the same thickness.

Ever wonder why all the public aquariums use Acrylic? 6 to 7 times more impact resistant and way clearer. Looking through a 12" thick panel and it is water clear!
 
Yes, my Lagoon 100 is acrylic and I've had two 55 gallon acrylics. @TheWB has a tank nearly identical to mine that is also acrylic.

Quick response, good quality acrylics don't yellow. They can scratch but truthfully I don't think there is a big difference between a quality acrylic and a low-iron glass tank as far as scratch resistance. Also acrylics seem to hide their scratches a little better. The real key is a good fabricator that uses quality acrylics. A quality acrylic also shouldn't craze. Besides that many scratches can be sanded out which isn't possible with a glass tank.

I've only retired one tank due to scratches, a 15 gallon Waterbox low-iron glass tank. I would say that you want to use a reputable acrylic fabricator for an acrylic tank as a few of the mass-market acrylic tanks are not as well made as they could be.

Cleaning is a little different as you use plastic-edged scrappers, melamine sponges (like magic erasers), and acrylic safe pads/cleaners instead of the stuff you are used to. I'd say it's a little more work if you let things go but it isn't much harder.
I agree with everything Tom said. No notes.
My tank is actually quite badly scratched due to a stupid mistake made by the moron who owns it. I’m not kidding, it’s bad, but honestly they are totally unnoticeable under normal viewing conditions. We’re talking multiple circular scratches on a large part of the front panel. If you didn’t already know the scratches were there you’d never notice them. You have to actually try to see them. If you have an acrylic tank it’s gonna get scratched, it just is, but in my opinion as someone who has really messed one up and is currently living with it, it’s not that big of a deal.
YMMV based on your level of OCD. It’s highly likely to get scratched at some point no matter how careful you are. If you can’t let stuff go maybe don’t get acrylic or low iron glass.
 
Good morning Smorg! I’ve not been able to post pictures or gif’s since early yesterday evening, anyone else experiencing this? Yes Tim, nothing happens when I click on the circular arrow like it did in the past.
 

TOP 10 Trending Threads

As a buyer, how important are auctions to you on the NEW market?

  • As a buyer I like them

    Votes: 30 31.6%
  • As a buyer I don’t care for them

    Votes: 41 43.2%
  • I don’t care either way.

    Votes: 24 25.3%
Back
Top
Home
Post thread…
Market
What's new