240g plumbimg help

[techhnyne]

im looking to plumb this setup but unsure the best way because i only have 4" below the reef ready frag tanks to run plumbing. I can have frag tanks on both sides with the sump behind the wall in a small filter room or the sump on one side frag on the other.

ideas please

 

[Heliarc19]

I would run it through the wall, just makes maintenance and hiding equipment easier

 

[techhnyne]

I would run it through the wall, just makes maintenance and hiding equipment easier

yes but im trying to think how i should run the pipes themselves. I will be running triton method and thinking if i should run the drains from the DP one into each frag tank then to the sump . or from DP to the sump then to the fragtanks then to the DP?
also i want to be able to do this with 1 pump but it seems like i will need 2 pumps for this since there is alot of horizontal plumbing.
also i only have 4" to spare under each frag rank to run plumbing

 

[Heliarc19]

I would connect the frag tanks and go from dt to frag then to frag/sump.

 

[techhnyne]

I would connect the frag tanks and go from dt to frag then to frag/sump.

how would you connect the frag tanks? they are reef ready here is an image of the setup currently. as you can see i do not have much room under the DP to plumb reef ready frag tanks and still have space to hang lights for frags

 

[Heliarc19]

Are the drilled on the back or bottom pane?

 

[techhnyne]

Are the drilled on the back or bottom pane?

drilled on bottom.

 

[Heliarc19]

drilled on bottom.

Hmmmmm.. plug it and drill the end of each and put some bulkheads with unions