27 Gallon Cube

[pelphrey]

If you are running a reef tank you should also have an auto top off. There are a ton of options when it comes to purchasing an ATO, I decided to go with the JBJ ATO. It is very common in the hobby and it allows you to flip float switch 2 around which will shut the ATO pump off if the water raises this float switch. If you are not running an ATO your skimmer can run inconsistently. Last running an ATO will allow you to leave the tank for days or weeks without worrying about burning your return pump out when to much water evaporates.

Maybe the most important factor is the fact that Auto Top Off's will stabilize the water, if there are salinity swings they will be minimal!

 

[pelphrey]

Got some more "Stuff" from BRS! I wanted to try out some of their filter socks, so I picked up 2 to test out. So far they are working out great in the Eshopps Nano Cube Sump! I also picked up some coral feeders. I've been wanted to feed my coral for awhile, I've just now got around to getting the food and tools to do so. I've only been feeding my coral the Reef Roids for a few weeks now and I haven't seen anything change, nothing good happens fast! Time will tell!

I did pick up the nano flipper, I probably should have went a size up. It takes some time getting used to how this thing works. Seems like every time I try to flip the cleaner the wet side takes off in the flow on the tank and gets lost in the middle of the sand.

Next on my list from BRS will be the screen top. I may try to order that this week. I'm holding off putting anymore fish into the tank until I can get it covered. A screen top isn't 100% fail safe, but it sure will help keeping my critters in the tank. I haven't had any jumpers yet, the clowns seem at piece in the tank.

 

[pelphrey]

When I installed the overflow on this tank I never considered that light would be getting inside of the box. Where there is light there is algae! With such a small foot print I didn't have many options as far as moving the light. I decided to pick up a sheet of ABS plastic and make my own cover. The overflow box I installed was bought off of eBay, and for whatever reason I paid for 1 box and the seller sent me 2. I kept the 2nd in my box of "stuff" and it came in handy when I needed to make my cutting template for the lid.

Nothing Fancy... Typical ABS

Creating the template

Might not be a pretty cut, but this can be fixed easily!

I could have very well cut this by hand. But it is MUCH more fun using air tools & faster!

The smell of burning plastic, 5 seconds later and we're done!

Notched out to fit around the Kessil Mount -

Not very pretty, but it is functional. Now the light can't get in the overflow and it will keep out unwanted guests!

 

[pelphrey]

If you saw my previous post you noticed that I made a lid for my overflow. Attached is the video of me making the lid and putting it on the tank! Over the last few weeks I noticed that I was getting unwanted algae growth inside of the box. With such a small footprint there really wasn't any other way to stop the light from getting inside of the box other than to make a lid for it. Not only will this stop the Kessil from penetrating the overflow it will now also keep unwanted guests from entering the overflow box!

 

[pelphrey]

Sold my 75 gallon freshwater african cichlid mbuna tank a few weeks ago so now the cube is the only tank I have to maintain! I'll be upgrading to a larger tank within the next year or so. It took me about a year to get all of the equipment I wanted for this cube, so it will take me about a year to get everything I need for a larger tank.

First up will be adding a water mixing station to my garage. I am using the SpetraPure CSPDI-MF 90 GPD RODI, I ordered a booster pump for is two days ago. I need to order my containers (They take 4-6 weeks to come in) soon. I am going with two vertical tanks. Top tank will hold 75 gallons of RODI water, underneath it I will be putting a 40-45 gallon tank for mixing salt water. I should be ordering the containers very soon!

I want to add more coral to the cube, my choices are limited without having to place an online order and pay for Saturday delivery. May make a road trip soon, or such it up and pay the delivery fee. I think I may try my hand in a few pieces of SPS!

 

[pelphrey]

It is a very poor picture, but I decided on Sunday during my water change I would cut up some coral and use some of the frag plugs I've had for awhile. I used a little to much glue, next time I'll use less. I have multiple colonies of zoa's that are doing well so I plan to start cutting them up a little at a time. So far the two plugs are looking good after a few days!

 

[pelphrey]

It's been a few months since I've added any fish to my 27 Gallon Cube Reef Tank. I went to my LFS to give them some dry goods I no longer needed, we all know where this goes from here! Afterwards I was looking around and they had 4-5 Firefish and I knew that at least one would work in my tank. So I had them feed the fish for me, I watched them for a few minutes then made my selection. The Firefish is always front and center and has been a great addition to my reef tank!

​

 

[pelphrey]

The Chaetomorpha I got from @915MANG in January/February has started to take off! This is under a

Out of the USPS Box and bag, 5 ml syringe for comparison -

Small compared to the MA887 -

Add to the Sump -

Chaeto as of now -

I am using the CREE 5000k LED Bulb over my refugium with a small lamp clamp both of these from Home Depot. Intially I removed the shroud from the socket, this turned out to be a bad idea. With such a small sump (Eshopps Cube Sump) the light was hitting my skimmer.

 

[pelphrey]

I wanted to do a "raw" video since I haven't done one in awhile. No editing & no voice over. Just me talking about my cube reef tank, going over some issues and talking about the equipment. Nothing new and nothing special.

​

First go at fragging -

Pond Matrix -

BRS Mini Reactor with GFO/Carbon -

 

[915MANG]

Looks good man!

 

[pelphrey]

Well the time has come. I started ordering some of the pieces I will be using on my tank upgrade. I got a bucket of Pond Matrix, a Spectrapure Booster pump for my RODI, the Super Reef Octopus SRO-2000INT Skimmer and some Red Sea test kits. The test kits will provide much needed information on my water quality and what coral I can keep. Eventually I would like to try some SPS coral. The SRO-2000 skimmer will allow me to stock heavy on the fish side & the booster pump will prolong my RODI filters and allow me to make water faster and more effectively. The tank I am looking to get will be in the 100-120 gallon range. I plan to use a 40 breeder as a sump with 3 sections. First section will be the drain/skimmer section, middle section will be a refugium and the last section will be my ATO/return section!

​

 

[pelphrey]

I decided I wanted to try fragging some of my zoanthids, I have a few different coloration's in my tank. First off PLEASE do your research, there have been numerous reports about how TOXIC this coral is, especially when cutting it. It was a very simple process, I did wear rubber gloves and eye protection... Please do so if you plan to cut ANY coral. Over all all of the heads that I cut are growing well and bounced back wonderfully.

I also decided it was time to trim my chaetomorpha as it was outgrowing my refugium. I decided I would take this to my LFS. I ended up trading 3 healthy bags for some frozen food.

​

 

[pelphrey]

Wasn't really looking for to buy anything else for the cube, yesterday a local guy had the Vortech MP10QD he was getting rid of (His tank cracked) and said he would give me everything he had for the tank if I bought the pump.

The Kent supps are over half full. One purple up is almost empty and the 2nd one is brand new. I've never used any of these, not sure if I will. I'll have to research! Also got some fish food that I currently use.

Wet side wasn't cleaned when the pump was taken offline. I dropped it in some vinegar last night!

 

[pelphrey]

Since I am in the process of upgrading tanks I decided to finally install the BADFISH AIO 20 Long kit I bought awhile back. The plan it to take move everything from my cube over to the 20 and part out the cube to fund the upgrade.

Black Silicone -

Not so good iPhone pictures with gel filter -

 

[pelphrey]

I scored a Vortech MP10 QD for a really nice price last week. I did soak the wetside in vinegar and cleaned it up before I installed it on my tank. Along with the MP10 I got everything the guy has left from his tank (His tank cracked). Bag of sand, bag of salt,, purple up, kent marine supplements and some fish food. I traded the bag of salt into my LFS and went ahead and picked up a Orchid Dottyback, why not I had store credit!

I finally put together the BADFISH AIO kit. It is a very nice AIO kit for 20 long aquariums. I will be moving everything from my cube over to the 20 long. After the move I will be parting out my cube and some equipment to fund the upgrade I am working on. I've built a stand before so I decided I would do it again for the 20 long. I failed this time around, I ended up gluing some pieces together in a rush and had to trash the stand. I am still trying to come up with a stand.

Last I picked up 2 Ocean Revive T247's. I really wanted to go with Kessil's but at the moment this is something I can't afford. I'll have to figure out which tank I am going with, either a 4x2x2 120 gallon or a 5x2x2 150 gallon. If I go the larger tank I will be getting another T247. I may opt to go with 2 T247's and keep my Kessil A160 and add another. Who knows!

​

 

[pelphrey]

Scrapped the 2x4 stand.. Went to PetSmart last night and they had a stand on clearance for $55, I knew I should have stopped by PetSmart before I bought the 2x4's last weekend. Stand was put together last night, I have some plumbing pieces coming from BRS once those pieces are in the move will begin.

 

[pelphrey]

10 minutes in the reef tank. The cube has been an amazing first reef tank, it was very fun to build. The build process of one of the best parts for me when it comes to setting up a new tank. For most of us there comes a time when we want more.. We want a bigger tank, more coral, more fish and larger fish. Everything in the cube is doing well, and I am hoping to get it all transferred to the 20 long very soon.

​

 

[pelphrey]

Here is an update on the 20 gallon Badfish AIO (All In One) kit. I decided against rebuilding the 2x4 stand or building another 2x4 stand. I popped into Petsmart to check out the stands that they had and got lucky! They had the perfect stand on clearance for $55. I knew I couldn't build a stand and wrap it nicely for the price of the Top Fin stand so I picked it up.

I also received 2 Jebao RW15's that I will be using for flow on the "Tank Upgrade". I picked them up used for a price that couldn't be beat. I wanted some Vortechs but right now I can't justify spending the money on those pumps.

Since I am using a sump on the 27 gallon cube I am using a Home Depot Clamp light and LED bulb over the refugium. I do not want to use that same light on the fuge in the 20 gallon. I got a great deal on the JBJ Nano GLO refugium light!

All of the fish tank project's have been delayed due to summer and projects going on around the house. I hope I get my new tank ordered this year, it may have to wait until 2017. The good thing is that will allow me time to save more money and I should have all of the hardware I need by then!

​

 

[pelphrey]

After not even a year I am both happy and sad to say that the 27 gallon cube has been taken down. Sometime in the near future I would like to upgrade to a bigger tank and to offset some of those costs I have moved my livestock into a 20 gallon that I installed the Badfish AIO kit on.

The cube was my first reef tank build and I couldn't be any happier with the way that it turned out. I learned a lot with this tank. The tank is a standard Marineland 27 gallon cube with the stand I picked up from Petsmart. I drilled the back for two 1" drains to use the herbie method. I originally used a 5.5 gallon tank as a sump. I wanted more water volume so I upgrade to the Eshopps Nano Cube Refugium sump. This sump is awesome!

The transfer begins -

The rock work in the 20 is temporary. I wanted to get everything in the tank and get the tank running. I'll give it a week or 2 to adjust and redo all of the rock work. Since I am not longer running a skimmer or reactor on the 20 (Not at the moment anyway) I plan to do more frequent water changes. Somewhere in the 1-2 gallons every few days ballpark.

JBJ NANO Glo refugium light

I haven't decided if I want to start another thread for the 20 long or if I want to continue to build onto this thread. Thoughts/suggestions?

Thanks!

 

[pelphrey]

In this video I document the process of me taking down the 27 gallon cube and moving everything into the BADFISH 20 gallon long AIO. It took a couple of hours to complete this task and I am thankful that I did this for a few different reasons. Reason number 1 is I am now able to clean the cube and some of my equipment and get it sold. The second and most important reason is that I learned a lot during this process. I now have a better understanding on what it takes to move a tank, even if this is just a nano tank. Moving from one tank into another wasn't all that bad, the worst part was getting the cube cleaned and moved into the garage.

I still have the cube and it is for sale! I will miss the cube as it was my first full reef tank build and easily the most in depth build I have ever done myself. I now look at the cube as a stepping stone as I learned a lot through out the build. I learned that you can truly fit an amazing amount of equipment into a small cabinet! I also learned what I would like to have in the future.

Please continue this journey with me and lets see where I go in this hobby in the future! I do appreciate everyone following along on this build - providing input and generally asking questions. I will have a full in depth review of the Eshopps NANO Cube Refugium sump in few day!

​