bbranham
New Member
- Joined
- Sep 18, 2020
- Messages
- 1
- Reaction score
- 0
- Location
- Saint Louis
- What state or country do you live in
- Missouri
Hello everyone
I am in the process of refreshing my 300+ Gallon Reef tank. It went for a number of years with minimal maintenance and I want to give some of the equipment an overhaul.
The tank is a cube of roughly 4'*5'*4' with a center overflow.
Starting with the overflow drain plumbing. Currently in the center overflow are 5 bulkheads (center electrical pass-through conduit for lighting and old controller probes, in each of the four corners are 1.5" bulkheads with plumbing for two returns in opposite corners with lockline Y fittings directing water and two in the final two corners with two durso style homemade drains)
The tank is fed from a basement rubbermaid sump being run by a sequence 5100seq22 pump with 16ish feet of head pressure and flowing roughly 3000gph.
Here are my goals:
1) *** Drains are obnoxiously loud I want to silence them (current drains T off under tank and return to sump using 2" PVC) Plan on converting to Herbie style but wonder if anyone knows much about a herbie with the T in the drain like I have?
2)I would love to reduce the power usage from the current 250 watts of usage on the pump.
3) Get Phosphate under control - currently running single two little fishes reactor but planning on switching to the dual chamber GFO/Carbon reactor from BRS.
4)change to a needle wheel skimmer from current MRC-2 Beckett - what needle wheels work well external to sumps?
I am in the process of refreshing my 300+ Gallon Reef tank. It went for a number of years with minimal maintenance and I want to give some of the equipment an overhaul.
The tank is a cube of roughly 4'*5'*4' with a center overflow.
Starting with the overflow drain plumbing. Currently in the center overflow are 5 bulkheads (center electrical pass-through conduit for lighting and old controller probes, in each of the four corners are 1.5" bulkheads with plumbing for two returns in opposite corners with lockline Y fittings directing water and two in the final two corners with two durso style homemade drains)
The tank is fed from a basement rubbermaid sump being run by a sequence 5100seq22 pump with 16ish feet of head pressure and flowing roughly 3000gph.
Here are my goals:
1) *** Drains are obnoxiously loud I want to silence them (current drains T off under tank and return to sump using 2" PVC) Plan on converting to Herbie style but wonder if anyone knows much about a herbie with the T in the drain like I have?
2)I would love to reduce the power usage from the current 250 watts of usage on the pump.
3) Get Phosphate under control - currently running single two little fishes reactor but planning on switching to the dual chamber GFO/Carbon reactor from BRS.
4)change to a needle wheel skimmer from current MRC-2 Beckett - what needle wheels work well external to sumps?
