75 Display with 25 Sump

  • Thread starter Thread starter ccook
  • Start date Start date
  • Tagged users Tagged users None
Update 11/1/2026

Been a while since my last update. I keep having troubles with my posts when drafting that if I take too long I loses them. I had had to start over three different times now.

I forgot to add my Duncan when I posts pics of all my LPS corals.

Here is a picture!
20261101_160341_1E6B41AB-FD92-463C-93ED-5114572C8BAE.png

Very nice Duncan that is extremely happy in its current location.

Yesterday, I went to my local LFS and bought 3 more LPS corals for my birthday!

I bought my first “Goni”.
20261101_161334_D5F8484D-FB21-4F54-A88F-390D853D94C2.png

For now it is happy in its new home.

I also got this new Favia coral.
20261101_161503_CCAF1A60-F1EA-448E-A1E4-70A7AC42616C.png

Hopefully will be good where I put it. Will have to keep an eye on the Goni as it about 4” away.

My last purchase was this “War Coral” Favite.
20261101_161727_443E0FDF-6009-4AE6-A5D1-7B82781A2876.png


Was looking for some color for the sand bed. Looks like if they go well will accomplish what I was going for. I have not had good results with Favia before but that was before I started doing and parameters stabilized. I am confident now that all these will do well.

Here are some of my SPS corals I have.

Walt Disney Acro
20261101_162102_39BB0646-6DA1-4218-AF75-A76C07269CDF.png

I have the most hope for this coral. To date probably my most expensive coral. It is at the top of my reef and is doing well. Have had this coral now for about 3 weeks. It does appear to be growing already.

Blue Oregon Tort
20261101_162527_3FAB6374-6E24-46F0-9A0C-656D82191A11.png

Hard to get a good shot of this one with all the blue light. It is up towards the top of the reef. It is happy and has been in the tank for roughly 3-4 months. It survived the alkalinity spike last month. It has doubled in size maybe more.

This birds nest is probably one of the stars to the SPS.
20261101_162900_6BD2CF80-4598-4A6A-9DCA-F9196F255DCA.png

This coral has probably quadrupled since purchased. Bought this about 3-4 months ago. Same with this coral survived the alkalinity spike.

Not sure what type of green Acro this is
20261101_163203_90EDCF44-840F-4D94-ABC7-D35F4EA504E4.png

It is growing well. 3-4 months in the tank. It is almost time to trim the birds nest back or these two will start to touch.

Here is a green Slimer that is doing well
20261101_163459_4E984F8D-CE1B-44B8-89E0-C23B112C4A43.png

This picture does not do it much justice. Must be an older picture. It is much bigger now. Probably twice this size. This acro has been in the tank for about 6 months now.

I will post this for now so I do not lose it again and write another to continue this post.
Very nice, well done!
 
Update 11/14/2026
Been almost two weeks since my last post.

Have several items to talk about today.

Trident NP update - Since the advanced replacement unit was installed a few weeks back it has been performing flawless. Definitely extremely happy with the results. I have validated my NP readings with Hanna readings a few times. PO4 dead on each time. NO3 yesterday measured at 5.8 by the Trident. This morning I tested with Hanna at 6.7. Well within the +- limits. I did perform the calibration using my Hanna results today’s in place of my NP testing for today. Tomorrow’s test should be good.

A couple weeks back Apex came out with its new Fusion App update. I was selected as one of the beta testers. I provided some feedback and they came out with an update shortly afterwards with my recommendations addressed. At first I was excited and then I started to not like it originally because it was really buggy at first. However, those items were addressed and now I have really grown to like it now. There has been mixed reviews/opinions on it. I do believe as this gets widely used and people do get used to the changes it will be more of a positive vs a negative. I really like the widget.

Last week I had a Trident ACM “Test A Fail”. Glad I installed my Tridents into the Printed Reef mini cases. I was able to take it apart really easy for access to see what was going on. I quickly found that the real problem was a “No Water Sample”. I found the Cuvette not filling up with sample water from my sump. Upon inspection I found a blockage in my sample line. I was able to clear it however, the Cuvette would still not fill with any water. I could watch the pinch valve work properly and the pump working properly. I was able to observe when the pump was spinning in the opposite direction for the waste line I could see small droplets of water moving in the clear line. So I took the guts out and made sure to clean the sample line from the manifold all the way to the sump and even through the 2 couplers. All was clear. Upon running the Trident again to prime the sample line the Cuvette still would not fill with water. I could hear a slight pressure releasing in the near the manifold when the pump was running and the pinch valve was open. So I believed the manifold to be plugged as well. I did open a trouble ticket with Neptune. And then the next day I called because I wanted to see if they sell the manifold separately. I spoke to a gentleman and he said they do but an actual Trident Support Tech would have to troubleshoot with me first and then the TS Tech would send me a link to purchase one after verification.

The gentleman did ask if I had used a pin to try to clear the blockage in the manifold and I said I had not as I was unsure of how the manifold was ported internally. I then decided to take it apart and remove the manifold. I did watch a video from Reef Dudes about the installation of the DIY Maintenance kit and saw that the manifold has a grove on the 12 o’clock position to align the manifold correctly once reinstalled. I felt comfortable now to remove the manifold. I am glad I did. The ports are real small so I had to use a very small safety pin. I found a complete blockage on the supply line side in the manifold. That blockage was very tough to clear out and took multiple attempts to get that safety pin through it. I wanted to be sure that the manifold was clear in all lines and the safety pin went all the way down without issue on all the other ports, so I knew for sure the issue was the blockage in the manifold ing the manifold. Once I cleared it I put everything back together and ran the sample prime function. BAM water now was making it to the Cuvette. The Trident alarm cleared and has been running successful test ever since.

My ticket still has not received any answer yet though I kept updating the ticket. I still want a replacement manifold as a backup and replace it when I receive my DIY Maintenance kit that will be here Monday. Not confident they will respond on that though. Just glad I was able to fix it. I can tell you that with the issues I have had with the NP and now the ACM I am extremely confident in my ability to troubleshoot and repair my Tridents.

These are really brilliant units but are very temperamental. Everything has to work properly to get good readings. I believe most nonbelievers in the Tridents just do not understand how they work. Once I understood them I am confident I will have these for a very long time especially since I can get the DIY Maintenance kits for both units. I will ensure I keep them in good working order. I also did cut the waste line so it does not sit in the disposed reagent. You can cut that line to length just not the sample line. That is directly from Neptune support.

So while the Trident was down for a few days I could not keep up with the daily testing so my Alkalinity dropped to under 8 DKH. It dropped all the way down to 7.23 DKH and. Calcium dropped to 370 ppm. Now that it is testing properly I have readjusted my All 4 Reef and Kalk dosing. My Alkalinity is returning back to 8 DKH. Still have a little bit to go to get the calcium back to over 400 but I am taking it slow.

Going to submit this comment now and write more on another comment so I do not loose what I have already written.
 
Update 11/14/2026
Been almost two weeks since my last post.

Have several items to talk about today.

Trident NP update - Since the advanced replacement unit was installed a few weeks back it has been performing flawless. Definitely extremely happy with the results. I have validated my NP readings with Hanna readings a few times. PO4 dead on each time. NO3 yesterday measured at 5.8 by the Trident. This morning I tested with Hanna at 6.7. Well within the +- limits. I did perform the calibration using my Hanna results today’s in place of my NP testing for today. Tomorrow’s test should be good.

A couple weeks back Apex came out with its new Fusion App update. I was selected as one of the beta testers. I provided some feedback and they came out with an update shortly afterwards with my recommendations addressed. At first I was excited and then I started to not like it originally because it was really buggy at first. However, those items were addressed and now I have really grown to like it now. There has been mixed reviews/opinions on it. I do believe as this gets widely used and people do get used to the changes it will be more of a positive vs a negative. I really like the widget.

Last week I had a Trident ACM “Test A Fail”. Glad I installed my Tridents into the Printed Reef mini cases. I was able to take it apart really easy for access to see what was going on. I quickly found that the real problem was a “No Water Sample”. I found the Cuvette not filling up with sample water from my sump. Upon inspection I found a blockage in my sample line. I was able to clear it however, the Cuvette would still not fill with any water. I could watch the pinch valve work properly and the pump working properly. I was able to observe when the pump was spinning in the opposite direction for the waste line I could see small droplets of water moving in the clear line. So I took the guts out and made sure to clean the sample line from the manifold all the way to the sump and even through the 2 couplers. All was clear. Upon running the Trident again to prime the sample line the Cuvette still would not fill with water. I could hear a slight pressure releasing in the near the manifold when the pump was running and the pinch valve was open. So I believed the manifold to be plugged as well. I did open a trouble ticket with Neptune. And then the next day I called because I wanted to see if they sell the manifold separately. I spoke to a gentleman and he said they do but an actual Trident Support Tech would have to troubleshoot with me first and then the TS Tech would send me a link to purchase one after verification.

The gentleman did ask if I had used a pin to try to clear the blockage in the manifold and I said I had not as I was unsure of how the manifold was ported internally. I then decided to take it apart and remove the manifold. I did watch a video from Reef Dudes about the installation of the DIY Maintenance kit and saw that the manifold has a grove on the 12 o’clock position to align the manifold correctly once reinstalled. I felt comfortable now to remove the manifold. I am glad I did. The ports are real small so I had to use a very small safety pin. I found a complete blockage on the supply line side in the manifold. That blockage was very tough to clear out and took multiple attempts to get that safety pin through it. I wanted to be sure that the manifold was clear in all lines and the safety pin went all the way down without issue on all the other ports, so I knew for sure the issue was the blockage in the manifold ing the manifold. Once I cleared it I put everything back together and ran the sample prime function. BAM water now was making it to the Cuvette. The Trident alarm cleared and has been running successful test ever since.

My ticket still has not received any answer yet though I kept updating the ticket. I still want a replacement manifold as a backup and replace it when I receive my DIY Maintenance kit that will be here Monday. Not confident they will respond on that though. Just glad I was able to fix it. I can tell you that with the issues I have had with the NP and now the ACM I am extremely confident in my ability to troubleshoot and repair my Tridents.

These are really brilliant units but are very temperamental. Everything has to work properly to get good readings. I believe most nonbelievers in the Tridents just do not understand how they work. Once I understood them I am confident I will have these for a very long time especially since I can get the DIY Maintenance kits for both units. I will ensure I keep them in good working order. I also did cut the waste line so it does not sit in the disposed reagent. You can cut that line to length just not the sample line. That is directly from Neptune support.

So while the Trident was down for a few days I could not keep up with the daily testing so my Alkalinity dropped to under 8 DKH. It dropped all the way down to 7.23 DKH and. Calcium dropped to 370 ppm. Now that it is testing properly I have readjusted my All 4 Reef and Kalk dosing. My Alkalinity is returning back to 8 DKH. Still have a little bit to go to get the calcium back to over 400 but I am taking it slow.

Going to submit this comment now and write more on another comment so I do not loose what I have already written.
Continued from above 11/14/2026 update.

On Veterans Day this week my LFS was offering a free frag to veterans. I drive out to the shop to pick mine out. This is what I chose. This is a grafted Monti of some sort. Colors are amazing on this.

20261114_144838_8E2E37AA-5F0C-40D4-A5C8-9891CB3C82B4.png


Then I also purchased this hammer coral.

20261114_145039_2EEFE232-D8F5-4A15-94DA-35A4185255F1.png


These are both on a frag rack for now acclimating to my tank. They both looked to be doing fine however, this hammer as soon as I moved the rack I saw what appeared to be a bunch of pieces of the coral displaced into the flow of the tank. I hope that was not polyp bailout. The picture attached is afterwards.

Last week, I also ran into an issue with my other Geourgous hammer that I posted before. One day I noticed that that some polyps were starting to bail out and I had no idea why. Then later that night I walked by the tank a couple hours after lights out. I noticed my Chalice had some very long stinging tentacles out and appeared to be stinging my coral.

This is the chalice:

20261114_145643_2D4CD006-E2AC-4BB7-8DAA-7ADE18FD8D59.png


And here is a before and after photos of my hammer:

20261114_145742_894A4FE1-1416-43C3-947B-53E2B674DF64.png


20261114_145808_214139FC-7D29-45E5-ACA0-FD22C72CE286.png


So disappointed in this. Never realized that that Chalice could do that. Now I know what caused my Kryptonite Candy Cane damage. That coral was sitting on the other side of the Chalice. Now it looks as though I do not need to get rid of my Aptasia Eating Filefish. I do not believe it is eating coral.

I moved the Chalice to the corner of the tank all by itself now and it seems to be doing ok there. My LFS recommended me to dip the hammer in Two Little Fishies Revive. She said it should recover. I dipped it on Wednesday night. Today is Saturday and it does not look like it has lost any more polyps. Time will only tell. I do run carbon but I need to change it out today. My flow sensor is not reading any flow out of the carbon reactor. I do believe the flow sensor is bad. Because when I change the carbon it will slowly ramp up with measuring flow and then go back to zero. That sensor will just have to stay where it is. I have replacement flow sensors but I do not want to deal with piping for now.

Other than that, remaining corals are doing well.

Everything else is continuing to explode with growth.

All fish are healthy and doing well.

PH issues appear to have been solved! Getting that Air Recirc for my skimmer was a game changer. I do have to run very dry in my skimmer because last week my CO2 reactor filled with tank water causing my CO2 absorbent media to be ruined and ineffective. Since I adjusted my skimmer, cleaned out my reactor and changed out the media the PH has really been exceptional. Peak PH hits 8.31 daily and drops down to about 8.11 overnight. All with windows closed.

I have ordered another Tropic Marin ICP plus test, some Fluorine and some Manganese to add to my daily dosing. Those two trace elements seem to be continuously be low on each of my ICP test results. Usually not even measurable or detectable amounts. That is even with dosing all for reef and the block elements. So I will go slow and follow the directions. Will see how that goes.
 
75 Gallon Aqueon Glass Tank not drilled
Trigger Platinum 26 Sump
Eshopps AEO 11015 Overflow box Pf-1200
Reefmat
COR15 Intelligent Sump pump
AI 10 Algae Scrubber
AI Axis Centrifugal 40 pump
AI Refugium Blade LED Light
Radion XR30 G6 Pro LED Light
AI 48” Blade Grow LED Light
AI 48” Blade Glow LED Light
2 MP40’s
2 300w heaters
1 Ink Bird Heater Controller
Apex A3 Pro Controller
3 EB832 Energy Bars
Apex MXM Module
3 FMM modules
2 - 1/2” flow meters
1 optical switch sensor
3 - 15” Apex Level Meters
1 optical floor water detector sensor
1 io breakout module
1 Trident MAW
1 Trident NP
1- DOS QD’s for dosing
2 DDR DOS Reservoirs
Dosing when needed - Kalkwasser, AllForReef, Magnesium7, Microbactor7
CO2 Reactor
Carbon Reactor
GFO Reactor
ConeS Q-1 Protein Skimmer
BRS 25w Classic UV Sterilizer
1 tank stand
1 side stand housing my sump and hard plumbed
1 side stand with all electronics mounted inside
1 UPS backup supply - working on installing a whole house generator
BRS 7 Stage RODI
RODI Booster pump
Mixing station
- 35 Gallon Brutte trash can for saltwater
Had been making 35 gallons of saltwater and leaving it sit with a wave pump and heater but have noticed slimy algae growth. Moving to only making saltwater day of use instead to bring ORP down from 475 to under 350.
- 35 Gallon Brutte trash can for RODI storage
1 Tunze Osmator 3 ATO
1 - 5 gallon Bashsea reservoir for ATO
2 - 10 Gallon Bashsea reservoirs for AWC
1 - DOS QD for AWC - changing 2 gallons everyday automatically.
Update 11/22/2026

Trident ACM is dead in the water for now. Received my DIY maintenance kit and installed it. During installation I broke the top hose barb port off of the manifold. The new hoses are extremely tight to install on the hose barbs and it caused the hose barb to break. I contacted Neptune support and spoke to them. The support tech was going to try to get me a link and price to purchase a manifold. That was over a week ago. No response received yet. They asked for my shipping address and then has been quiet since. I will reach back out on Monday by phone to see if there has been any update on this. So manual testing again for me.

So far the manual testing is a little struggle for me as I do not get a ton of time daily to do them. Calcium is steady at 410. Magnesium is rising by a little but well within a good range at 1410. Alkalinity the most important has stabilized but is dropping daily to 7.8 DKH. I am trying to keep it between 8-8.3 so just a little bump is necessary.

I will not be increasing my All For Reef or Kalkwasser dosing any. I will just add alkalinity separately to get the level where I want it.

PH is still very stable now. 8.35 at peak Lighting during the day to minimum 8.11 at night with lights out.

I received the Triton Fluorine and Manganese. I used AI to determine the dosing amounts based off of last ICP results. Settled on 60ml of Fluorine dosed each day for two days. That was completed last night. Then Manganese will be dosed 1.0ml 2-3 times weekly. I started that this morning. I have a new ICP test kit ready to complete and send in. I will wait a couple days for that though to let everything level off. I will update with results.

I did change out my carbon last week as I said I would in my last update.

My Goni is looking real good and hoping to get even more color out of it with the manganese dosing.

20261122_131939_6EBF5A6C-EECA-432D-A201-9C74A25428B0.png


So far all corals are growing well. I do believe my damaged hammer has stabilized now and is even starting to show some polyps coming back. Still was nearly a complete loss from that Chalice stinging.

Last weekend I let my fleece roller run out. What a PITA to rerun the fleece when that happens. Took about an hour. Made a mess and a lot of cursing but was successful at it. I really wish the level sensors worked with the trigger controller so I would have better control of when it gets low. For now it is running on a timer to roll. It is working well that way. I do have a breakout module for my Apex and have the roller controller hooked up to that to alert me when the controller says it is out but that is not accurate. The level indicator usually has to run through two different cycles before the fleece is at time to replace. If I do not keep an eye on it the controller will keep rolling and then I have to rerun the fleece which is not an easy task.

I removed the two Maxspect cloud gyres from the display as they were unsightly and not really useful since I have my two MP40’s.

I am starting to see some cyano startup again. It is manageable for now but I have to blow it off frequently. I am starting to see an increase of biofilm algae on my display glass. I used to have to scrape weekly. Now it seems as though I am having to scrape every other day now. My nutrients are in good shape. NO3 = 10.1 and PO4 = 0.15 this morning. Might be because of the Fluorine. According to AI I will have to keep an eye out. I might increase my Algae Scrubber light time to assist.

I probably need to replace my UV bulb. It has never been changed and is now 1 year and 8 months old. The flow I use for my UV is low @ 37GPH and more for eradicating and or keeping parasites and Dino’s at bay. Not sure the flow is high enough for algae control.

Picture of display:


20261122_132113_F8D5C286-191A-4850-BD5E-D7EC6E169B17.png
 

TOP 10 Trending Threads

HOW WOULD YOU FEEL ABOUT RECEIVING A FISH OR CORAL AS A HOLIDAY GIFT?

  • I’d love one, as long as it’s a species I chose

    Votes: 26 23.0%
  • I’d trust someone who knows my tank to choose

    Votes: 10 8.8%
  • I’d rather get a gift card and pick it myself

    Votes: 45 39.8%
  • I’d prefer gear or supplies instead

    Votes: 3 2.7%
  • Please don’t surprise me with livestock

    Votes: 29 25.7%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new