A simple method to drip dose into a tank.

  • Thread starter Thread starter Dom
  • Start date Start date
  • Tagged users Tagged users None

Dom

Theoretical Reef Keeper
View Badges
Joined
Apr 29, 2016
Messages
7,882
Reaction score
8,331
Location
NY
Rating - 0%
0   0   0
So I have been supplementing Calcium and ALK.

I drilled a small hole in the bottom of a 1 gallon glass jug and installed an elbow from an RODI float valve. I've connected a piece of 3/8" tubing, but I need to be able to control the drip rate with some kind of valve at the end.

Any ideas?

​

 
That's old-school! lol When I first got into the hobby 20-25 years ago, that's how we dripped kalk into our tanks.

You want easy? Plus accuracy? Just get a dosing pump. Seriously.

I have a dosing pump. But pumps fail; they clog, they cease... I'm shooting for simplicity.
 
That's old-school! lol When I first got into the hobby 20-25 years ago, that's how we dripped kalk into our tanks.

You want easy? Plus accuracy? Just get a dosing pump. Seriously.
Yep....I waited 20 years for the price of pumps to come down:p. They work great!
 
Nice... but I like to keep things simple. I'm thinking something like this, which will allow me to control the drip rate...

Amazon product ASIN B01N1UZFML
Nice... but I like to keep things simple. I'm thinking something like this, which will allow me to control the drip rate...
It won't. It seems simple in principal, but it's going to be a headache. I've been down the path you're on, the drip rate will never ever be consistent. It's gonna clog. It's gonna be fast at first slow towards the end. You're going to be playing with that valve 7 days a week.
I've done what you're trying to do under specific circumstances where I had a set amount of solution and I didn't care how long it took to get into the tank, (phyto, lanthinum chloride, ADJUSTING calcium or mag or something) I would never trust it as a main source of supplementation.

Kamoer x1 is 60 bucks. Accurate, daisy chainable
 
I have a dosing pump. But pumps fail; they clog, they cease... I'm shooting for simplicity.
The drip rate will be really slow and there is probably going to be lots of buildup that you are going to have to clean constantly or the dosage is really going to vary
 
Here is a DIY drip doser that I use for Ca, Alk, and Misc (3 Seperate Containers) for my system. Not sure if this is what you may be looking for, but it keeps my system simple and not reliant on a doser pump (Bare in mind, I am not down playing the usefulness of dosers).

I found the acyrlic container (5+ inches diameter) at Target, but have not seen them in a very long time. The base is really thick, which made it easy to drill a hole into it horizontally. Then I drill another hole coming from the top to connect a passage. Glued in a plastic air line tubing straight connector (link provided later in this reply as an example, but can be bought at Petsmart for cheap). Connect a small air line, then valve, and another desired length of tubing to finish.

DIY Gravity Fed Doser 4.jpg
DIY Gravity Fed Doser 3.jpg
DIY Gravity Fed Doser 1.jpg
 
Here is a DIY drip doser that I use for Ca, Alk, and Misc (3 Seperate Containers) for my system. Not sure if this is what you may be looking for, but it keeps my system simple and not reliant on a doser pump (Bare in mind, I am not down playing the usefulness of dosers).

I found the acyrlic container (5+ inches diameter) at Target, but have not seen them in a very long time. The base is really thick, which made it easy to drill a hole into it horizontally. Then I drill another hole coming from the top to connect a passage. Glued in a plastic air line tubing straight connector (link provided later in this reply as an example, but can be bought at Petsmart for cheap). Connect a small air line, then valve, and another desired length of tubing to finish.

DIY Gravity Fed Doser 4.jpg
DIY Gravity Fed Doser 3.jpg
DIY Gravity Fed Doser 1.jpg

Yes, that's basically the design I've used. It's a 1 gallon glass jug that I've installed a bulkhead in. Plastic air tubing and a small air valve at the end.

But the valve clogs and the drip rate changes as the level goes down.

I have a dosing pump. I could add a timer and dispense that way.
 

TOP 10 Trending Threads

HOW WOULD YOU FEEL ABOUT RECEIVING A FISH OR CORAL AS A HOLIDAY GIFT?

  • I’d love one, as long as it’s a species I chose

    Votes: 26 24.1%
  • I’d trust someone who knows my tank to choose

    Votes: 9 8.3%
  • I’d rather get a gift card and pick it myself

    Votes: 44 40.7%
  • I’d prefer gear or supplies instead

    Votes: 2 1.9%
  • Please don’t surprise me with livestock

    Votes: 27 25.0%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new