A360X Troubleshooting

LagoonBafoon

Community Member
View Badges
Joined
Sep 30, 2024
Messages
53
Reaction score
64
Location
mississippi
Rating - 0%
0   0   0
I have 2 Kessil A360X with the WiFi dongle that I purchased used last year. When I initially purchased the lights I tested everything and it all worked as it should. I only needed one on the tank I had at the time and bought the pair intending to use them both on a future upgrade. When I was using only one of the lights the app would pop up a warning for the second light being disconnected every time I opened the app. To get rid of the pop up warning, I deleted the second light from the group since it wasn’t being used. Fast forward to today, I’m setting up the pair on my new tank and I cannot get the app to recognize the second light. Ive refreshed the app on the dashboard page, I’ve reset the dongle, I’ve reset the app. I’ve done everything I can think of. The second light will randomly blink on and off for a few seconds but will not fully turn on and the app won’t pick it up. Any help for this before I pull my hair out and order a different light?
 

areefer01

5000 Club Member
View Badges
Joined
Jun 28, 2021
Messages
5,741
Reaction score
5,946
Location
Ca
Rating - 0%
0   0   0
Outside of checking physical connections or swapping the wifi dongle to see if the problem follows reach out to Kessil support. They may be able to suggest more.
 

Matt L

10K Club member
View Badges
Joined
May 15, 2021
Messages
10,746
Reaction score
41,843
Location
US
Rating - 0%
0   0   0
I’d also check to see if the second light was placed in another group when reconnected.

IMG_0138.jpeg
 

oreo54

5000 Club Member
View Badges
Joined
Sep 18, 2017
Messages
6,911
Reaction score
4,110
Rating - 0%
0   0   0
The second light will randomly blink on and off for a few seconds but will not fully turn on and the app won’t pick it up. Any help for this before I pull my hair out and order a different light?
Sounds like it might be electrical.
360X's seem to have issues..

@_AV
 

CBonito

2500 Club Member
View Badges
Joined
Aug 20, 2023
Messages
2,855
Reaction score
8,127
Location
Detroit Area
Rating - 0%
0   0   0
I have 2 Kessil A360X with the WiFi dongle that I purchased used last year. When I initially purchased the lights I tested everything and it all worked as it should. I only needed one on the tank I had at the time and bought the pair intending to use them both on a future upgrade. When I was using only one of the lights the app would pop up a warning for the second light being disconnected every time I opened the app. To get rid of the pop up warning, I deleted the second light from the group since it wasn’t being used. Fast forward to today, I’m setting up the pair on my new tank and I cannot get the app to recognize the second light. Ive refreshed the app on the dashboard page, I’ve reset the dongle, I’ve reset the app. I’ve done everything I can think of. The second light will randomly blink on and off for a few seconds but will not fully turn on and the app won’t pick it up. Any help for this before I pull my hair out and order a different light?
Take the light that isn't working and swap it with the one that is. See if it fires up. If it fires up, it's likely the power supply. I have a power supply coming tomorrow for one of mine for this same reason. If i turn mine on, it will flash once and then stay out. Usually bad caps or something in the power supply. It's not detected by the controller, and if the power supply is gooched it's not going to see it.

They have replacements on amazon that are like 18 bucks.
 

_AV

Well-Known Member
View Badges
Joined
Oct 3, 2019
Messages
781
Reaction score
725
Rating - 0%
0   0   0
Free tip. Do not buy cheap power supplies for expensive lights on amazon. OEM power supplies are more expensive for a a good reason.
 

TOP 10 Trending Threads

Back
Top