Abyzz Help

[shent69]

Not sure what I need to get to hook up a Abyzz A200 to my P4 so I can control the speed of the pump.

 

[qnguyen]

Did you ever figure this out? I am planning to do the same with my A100. As far as I can tell, you just need this interface, but it would be good to get confirmation from someone that has done this.

Abyzz 3rd-Party Controller Interface

Connect your Abyzz pump to a HYDROS WaveEngine 0-10V INPUT controller with this simple to install interface and use Fusion to do all your programming for 24-hour cycles, enable feed modes, and apply warnings and alarms.

www.coralvue.com

 

[Vinny@GHLUSA]

Did you ever figure this out? I am planning to do the same with my A100. As far as I can tell, you just need this interface, but it would be good to get confirmation from someone that has done this.

Abyzz 3rd-Party Controller Interface

Connect your Abyzz pump to a HYDROS WaveEngine 0-10V INPUT controller with this simple to install interface and use Fusion to do all your programming for 24-hour cycles, enable feed modes, and apply warnings and alarms.

www.coralvue.com

Yes, that's the correct part for Abyzz control.

 

[qnguyen]

Yes, that's the correct part for Abyzz control.

@Vinny@GHLUSA Do I also need to buy this pump controller?

PumpControl 1, USA/CND - GHL USA

Pump control for 2 current pumps (12 VAC / max. 2A) with USA/CND-power supply unit and 2 adapter cables for Koralia Nano/1/2/3/4 (Koralia is a registered and protected brand name of Hydor S.r.l.)

www.aquariumcomputer.com

 

[Member No 1]

@Vinny@GHLUSA Do I also need to buy this pump controller?

PumpControl 1, USA/CND - GHL USA

Pump control for 2 current pumps (12 VAC / max. 2A) with USA/CND-power supply unit and 2 adapter cables for Koralia Nano/1/2/3/4 (Koralia is a registered and protected brand name of Hydor S.r.l.)

www.aquariumcomputer.com

You are looking to control an Abyzz pump. You only need the one Vinny linked to.

The link you posted is for a different brand.

Description
2-channel pump controller for 12V pumps with max. 24 W. The device is connected directly to an L-port (1 – 10 V) to the ProfiLux Controller, the control cable is supplied. The scope of supply in addition to the power supply includes 2 adapter cables. They allow easy connection of Hydor Koralia® pumps (Koralia® Nano and Koralia® 1 to 4, only 12 V version!).

 

[Member No 1]

Duplicate post - removed.

 

[qnguyen]

You are looking to control an Abyzz pump. You only need the one Vinny linked to.

The link you posted is for a different brand.

Description
2-channel pump controller for 12V pumps with max. 24 W. The device is connected directly to an L-port (1 – 10 V) to the ProfiLux Controller, the control cable is supplied. The scope of supply in addition to the power supply includes 2 adapter cables. They allow easy connection of Hydor Koralia® pumps (Koralia® Nano and Koralia® 1 to 4, only 12 V version!).

Thanks!