Alkalinity consumption vs. Calcium levels

michealprater

Well-Known Member
View Badges
Joined
Dec 18, 2008
Messages
509
Reaction score
569
Location
Highland IL
Rating - 0%
0   0   0
I currently dose Tropic Marin All-For-Reef. It does a fantastic job of keeping my calcium and magnesium stable in my tank, however it cannot keep up with buffering the alkalinity. I decided to start dosing kalkwasser because I figured it would help with the alkalinity and I would have the added benefit of the ph increase, which I had plenty of headroom for. Only issue is the kalk is also raising my calcium numbers, that are stable. If I get the kalk to buffer the alk up to a number i need, it sends my calc over 500. So my question is, would Soda ash be a better alternative to kalk so it just raises alk? Also, will soda ask give me the added boost to PH that kalk is giving me?

Thanks in advance!
 
Right now I am just bumping the Alk with Sodium bicarbonate daily. My tank can stay stable on calc and mag, and consumes .25 dkh per day of alk.
You do know that if you bake bicarbonate powder, when mixed with water for dosing, that will also increase pH?
 
Right now I am just bumping the Alk with Sodium bicarbonate daily. My tank can stay stable on calc and mag, and consumes .25 dkh per day of alk.

500-550 ppm calcium is fine, but if you want to boost alk and not calcium, then any ordinary alk supplement is fine to use in addition to the All for Reef.
 
500-550 ppm calcium is fine, but if you want to boost alk and not calcium, then any ordinary alk supplement is fine to use in addition to the All for Reef.
Thanks Randy, outside of kalk is there any alk supplement that will increase my ph as well?
 
BRS has a few videos on the subject with which brands and how they affect pH. IIRC, the latest is 'De-Mystifying Two Part'.
 
Will this work?

Pure Lye Drain Cleaner / Opener, 2 lbs. Food Grade Sodium Hydroxide Micro Beads - HDPE container with resealable Child Resistant cap Amazon product ASIN B001EDBEZM

Yes. My suggestion is to read through the above linked thread for discussions by folks using this method. I would suggest it is an advanced method that maty need more care for things like safety and plastic compatibility, etc.
 
Awesome. Thank you so much! I am always amazed at your willingness to help others and how thorough you are. I have admired this for years from another forum prior to here. Thanks for all you do for the community.
 
I may have overlooked it, but I am 10 pages in and have yet to see what types of bottles I can use for the solution.

Polyethylene and polypropylene are perfect. Others may be OK.
 
Food grade what? HDPE or PP are fine.
My bad lol I did mean plastic and you awnsered my question thank you very much

Have you noticed one having a better life then the other or do they both hold up just fine

I assume they both hold up just fine long term with no leaching or absorbing anything

Also would an acrylic box be better

Thank you for your time
 
Both polypropylene and HDPE should last a long time, and any degradation is likely from oxygen and UV slowly damaging the container, not the contents damaging it. HDPE and PP are about as inert as plastics can get.

Acrylic is not better, and is likely worse.
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.5%
  • Fish or coral food

    Votes: 5 5.4%
  • Test kits or reagents

    Votes: 10 10.9%
  • Filter media or replacement fleece

    Votes: 5 5.4%
  • RO/DI filters or supplies

    Votes: 14 15.2%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 10.9%
  • I keep a backup of everything

    Votes: 24 26.1%
  • Other (Post in the comments)

    Votes: 7 7.6%
Back
Top
Home
Post thread…
Market
What's new