Alkalinity help

  • Thread starter Thread starter Mickle
  • Start date Start date
  • Tagged users Tagged users None
So I make an Alkalinity and calcium solution then mix them together when I dose? I don't have any of the ingredients to make the calcium solution:( Ill have to search for those so I guess I wont be dosing anytime soon ;Sour
DO NOT mix your CA and ALK solutions. Dose them separately and give space in between one and the other.

If you have all softies and polyps you may not even need dosing. Your consumption will dictate dosing. In a smaller tank regular small wc may be sufficient. Stability is the key
 
I’m not horribly experienced with running a softy only tank but my best guess would be you need to lower the Alkalinity to around 11. This can be done with the premixed saltwater from your store if it is RC and has a high dKH. To do this you would add muratic acid to bring down the dKH in the new water then do your water change. There’s some good info on the forum as to how to lower the dKH in newly mixed water. I personally use the RedSea blue bucket salt mix because the parameters are extremely consistent and I get a consistent dKH when mixed of around 7-8dkh. I run a mostly SPS tank with good amount of LPS so if my alk goes much higher than 9 I start getting burnt tips on my SPS. Buying RODI from them should be fine however I would bring a TDS meter there with you to test there water. There was a store by me at one point selling RODI water with a TDS of 40+.
 
DO NOT mix your CA and ALK solutions. Dose them separately and give space in between one and the other.

If you have all softies and polyps you may not even need dosing. Your consumption will dictate dosing. In a smaller tank regular small wc may be sufficient. Stability is the key
I started my tank with all LPS and took a significant amount of time before I even had to do some small manual dosing
 
Okay, thanks! :D

I’m not horribly experienced with running a softy only tank but my best guess would be you need to lower the Alkalinity to around 11. This can be done with the premixed saltwater from your store if it is RC and has a high dKH. To do this you would add muratic acid to bring down the dKH in the new water then do your water change. There’s some good info on the forum as to how to lower the dKH in newly mixed water. I personally use the RedSea blue bucket salt mix because the parameters are extremely consistent and I get a consistent dKH when mixed of around 7-8dkh. I run a mostly SPS tank with good amount of LPS so if my alk goes much higher than 9 I start getting burnt tips on my SPS. Buying RODI from them should be fine however I would bring a TDS meter there with you to test there water. There was a store by me at one point selling RODI water with a TDS of 40+.

Oh okay, well I'm not going to dose it anymore but for the future, Thanks!:D

DO NOT mix your CA and ALK solutions. Dose them separately and give space in between one and the other.

If you have all softies and polyps you may not even need dosing. Your consumption will dictate dosing. In a smaller tank regular small wc may be sufficient. Stability is the key
 
I started my tank with all LPS and took a significant amount of time before I even had to do some small manual dosing

Agreed. Even with a mostly SPS dominated tank I just recently had to resort to running kalkwasser in my ATO water.
 
For my tank here are the parameters I keep:

Calcium - 440
Alkalinity - 8.7
Magnesium - 1380
pH - 8.2
Salinity - 35ppt
Temp - 78.6
454ef6fca9fed0986679c1a801b103a8.jpg
 
Reading kits and syringes backwards is not that unusual.

With virtually any kit, it is always good to keep in mind that the more liquid you have to add to get to the color change, the higher the answer is going to be in the value of the parameter you are making. If that does not seem to be the case, there's a good chance you are reading the syringe or table backwards. :)

As to the alk now, just let it drop on its own (at least, if it seems to be doing so after a week or so). If not, it can be lowered, but that is best left to more experienced folks.
 

TOP 10 Trending Threads

WHAT KIND OF REEFING DEAL ARE YOU HOPING TO PICK UP THIS BLACK FRIDAY?

  • A whole new aquarium or complete system

    Votes: 3 12.0%
  • Lighting, pumps, or other major equipment

    Votes: 4 16.0%
  • Controllers, testing, dosing, or automation gear

    Votes: 2 8.0%
  • Dry goods and restocks, like salt, media, or food

    Votes: 2 8.0%
  • Corals! Must...Have...CORALS!!!

    Votes: 6 24.0%
  • Fish or other livestock

    Votes: 1 4.0%
  • Rock, sand, or other aquascaping supplies

    Votes: 1 4.0%
  • I’m browsing, but don’t have a specific target

    Votes: 4 16.0%
  • I’m not shopping for reef deals this year

    Votes: 1 4.0%
  • Other (Post in the comments)

    Votes: 1 4.0%
Back
Top
Home
Post thread…
Market
What's new