You are middle of the road (fine) on Alk, though it would be nice and have many benefits to be higher. pH is definitely flat...please work to get that higher. Agreed here too on the comments above about CO2, etc with one caveat: increasingf gas exchange and airflow will not help if the house or room this tank is in is so well insulated.
But to the point, you can easily test and confirm if accumulated CO2 in the house is your problem or not by taking a glass or small buket of aquarium water outside (or under a porch, garage if not well insulated, etc); test the pH of that sample water in the house and then outside after its been aerated for at least a few hours (6+ and not in full sun). If the pH raises after aeration, you likely have a CO2 problem. It really shouldn't raise.
If you determine that is your problem, one simply solution is to get a strong airpump (linear jobs or luft pump style) and pump air from a better ventilated place (luft pumps are for ponds and they are weather resistant...make a cover and you can keep them outside). The piped air can be injected into a skimmer venturi, bottom of a trickle filter (below the media but above the sump water level). Doping this will usually buy you at least a .2 increase on the pH scale.