all for reef

  • Thread starter Thread starter reefGods
  • Start date Start date
  • Tagged users Tagged users None

reefGods

Active Member
View Badges
Joined
Jun 21, 2024
Messages
140
Reaction score
15
Location
Palm Beach
Rating - 0%
0   0   0
how’s it going my reefing community? Using all four reef and my 55 gallon tank. I finally got my parameter stable 8.2alkalinity calcium 460. last night my alkalinity was at 8.1 10 hours later my alkalinity is at 7.1 how much all for reef do I need to get it back to 8.2 ml? I use the tropic calculator, but I don’t understand it.
IMG_8466.jpeg
IMG_8481.jpeg
 
All for Reef is not a good choice if just your alkalinity is low since it will also raise the calcium and magnesium levels. It is meant to maintain your levels, not adjust them.

You can use a product just to raise alkalinity to where you want it, and then adjust the All For Reef dosing for what is needed to maintain your levels.

You can use any of the name brand liquids to do this.
Here is a good calculator to figure out how much you need to add by brand name.

Most of these products will cause a significant increase on pH, so only dose small amounts slowly into a high flow area.

https://reef.diesyst.com/chemcalcnew.html
 
My first question is, how old is your system and how heavily stocked is it. Also a FTS will help
System has been running for one year SPS dominant have some LPS as well fully stocked up I’ve been using two part dosing. I’m going to start using. all for reef
 
All for Reef is not a good choice if just your alkalinity is low since it will also raise the calcium and magnesium levels.
You can use a product just to raise alkalinity to where you want it, and then adjust the All For Reef dosing for what is needed to maintain your levels.
You can use any of the name brand liquids to do this.
Here is a good calculator to figure out how much you need to add by brand name.

https://reef.diesyst.com/chemcalcnew.html
it won’t raise calcium that much
 
All for Reef is not a good choice if just your alkalinity is low since it will also raise the calcium and magnesium levels. It is meant to maintain your levels, not adjust them.

You can use a product just to raise alkalinity to where you want it, and then adjust the All For Reef dosing for what is needed to maintain your levels.

You can use any of the name brand liquids to do this.
Here is a good calculator to figure out how much you need to add by brand name.

Most of these products will cause a significant increase on pH, so only dose small amounts slowly into a high flow area.

https://reef.diesyst.com/chemcalcnew.html
I already adjusted it the parameters I’ll alkalinity
8.1 in calcium 460 question is how much does 1 ML of all for reef raise of DKH
 
Not sure if this helps, here’s my calculations for AFR in my 59g system.
IMG_4551.jpeg
do you or the 11?.17
Not sure if this helps, here’s my calculations for AFR in my 59g system.
IMG_4551.jpeg
do you pour the 11.17 ML at once? or do you spread it around today? What’s the best time to do this?
 
I might suggest slowing down for a moment.

"I finally got my parameter stable 8.2alkalinity calcium 460. last night my alkalinity was at 8.1 10 hours later my alkalinity is at 7.1"

How long were your parameters stable?

A full 1 point drop of dKH in 10 hours seems very unlikely unless something else changed. Medium size water change with much lower alk salt or something like that.
 

TOP 10 Trending Threads

ARE YOU READY TO CONFESS TO CRAZIEST, DUMBEST, FUNNIEST THING YOU’VE EVER DONE IN REEFING?

  • Yeah, I'll confess! (Share your story in the comments!)

    Votes: 38 53.5%
  • Nah, I'll keep mine a secret...(Don't be like that, share with the class!)

    Votes: 33 46.5%
Back
Top
Home
Post thread…
Market
What's new