Anemone Nest Shell - 3D Printed PETG - Stop Anemone from Escaping

[-JoJoReefing-]

Anemone nest that will stop anemones from walking around in tank! Openings on the side and the end help with water movement and debris removal. Three sizes available: S/M/L (about 2/3/4 inches) for $10/$13/$16. Different colors can be made upon request. Shipping costs about $6.

Size chart for your reference (best guess based on my tests; anemone size measured when they are fully open):
small nest: <= 2.5inch disc / <= 1.5inch foot
medium nest: <= 4inch disc / <= 2.5inch foot
large nest: <= 6inch disc / <= 3.5inch foot

I have been using a few different types of anemone nests, so far the shell shape proves to be the best, with really low chances of anemones escaping.

Instruction: put the loose anemone into the shell and gently push it into the channel with its foot towards the inside of the nest. Let the anemone set foot in the channel, and monitor it for the first 15 minutes. Once the anemone sets foot in the right direction, it is very unlikely to leave the shell unless it has grown out of the nest, or the current/light is extremely unpleasant.


Printed with PETG that will last in reef tank and do not leach harmful chemicals. The surface is relatively coarse, which is better than smooth surface for anemone to grab.

 

[REEF2REEF]

This is an automated message:

Please be aware of a popular scam where someone will send you a private message (DM) and tell you that they have a certain item you are looking for. Most of the time they will try to get you to pay in an unprotected format. This is against our rules for this very reason.

DO NOT SEND THESE PEOPLE YOUR MONEY!

In all marketplace transactions please do your due diligence and make sure when you send someone money that they are not trying to scam you. If you're unsure, do not do it. If it seems to good to be true, then it probably is.

Thank you.

THIS ACCOUNT IS NOT MONITORED PLEASE DO NOT RESPOND TO THIS MESSAGE.

 

[draj]

edit

 

[-JoJoReefing-]

pictures?

just finished uploading the pics

 

[Jimr7]

Anemone nest that will stop anemones from walking around in tank! Openings on the side and the end help with water movement and debris removal. Three sizes available: S/M/L (about 2/3/4 inches) for $10/$13/$16. Different colors can be made upon request. Shipping costs about $6.

I have been using a few different types of anemone nests, so far the shell shape proves to be the best, with really low chances of anemones escaping.

Instruction: put the loose anemone into the shell and gently push it into the channel with its foot towards the inside of the nest. Let the anemone set foot in the channel, and monitor it for the first 15 minutes. Once the anemone sets foot in the right direction, it is very unlikely to leave the shell unless it has grown out of the nest, or the current/light is extremely unpleasant.


Printed with PETG that will last in reef tank and do not leach harmful chemicals. The surface is relatively coarse, which is better than smooth surface for anemone to grab.

These are great. Bought small and mediums. Here’s a picture of one of my newly separated BTA in a small if you can see it. Thanks again.

 

[viceversabrd]

How do you know which size nest you need? I don't have a nem yet but when I get one I'll def be hitting you up.

 

[-JoJoReefing-]

How do you know which size nest you need? I don't have a nem yet but when I get one I'll def be hitting you up.

The following size chart can be used for reference (best guess based on my tests; anemone size measured when they are fully open):

small nest: <= 2.5inch disc / <= 1.5inch foot
medium nest: <= 4inch disc / <= 2.5inch foot
large nest: <= 6inch disc / <= 3.5inch foot

I dont have an anemone larger than 6 inch, not sure if larger ones would need an XL nest. I notice my small anemone not always escape from large nests...... and sometimes it takes a second attempt to get them settled in the nests. I will try to make a video some time soon.