Anyone using AI Orbit Cross-Flow pumps?

Oberst Hajj

Well-Known Member
View Badges
Joined
Dec 23, 2012
Messages
978
Reaction score
808
Location
Colorado
Rating - 0%
0   0   0
I've been running a pair of Icecap 2k gyre on my 270g tank for a couple of years now and have been pretty happy with them. I recently upgraded the WIFI system in my home to a WIFI 6 mesh network and the Icecap controller will not connect to it. I was thinking now might be a good time to upgrade my pumps and liked the idea that the Orbits can be controlled directly from my Apex with the MXM module.

I'm wondering if anyone has/is using the Aquaillumination ORBIT Cross-Flow pumps and what your thoughts are on them?
 
i believe the AI gyres are just rebranded maxspect gyres. i could be wrong, but the reviews may be slightly similar if you want to do a small dive into their reviews while you wait for better answers.
 
i believe the AI gyres are just rebranded maxspect gyres. i could be wrong, but the reviews may be slightly similar if you want to do a small dive into their reviews while you wait for better answers.
Thanks. My research has also found that the equipment is a rebranded maxspect gyre. The difference is on the software side.
 
Thanks. My research has also found that the equipment is a rebranded maxspect gyre. The difference is on the software side.
yeah. if it weren't for the fact i can control everything in the myAI app, i would just get a maxspect gyre. before they came out with the gyre and return pump, i bought a jebao gyre(scp-70). i'm very happy with it, although there is a hum from the vibration that becomes obvious if you're viewing the tank closely
 
Jebao makes a gyre at a lower cost and reviews are generally good. In case you’re interested, look up Jebao SCP-120, for example.

yeah. if it weren't for the fact i can control everything in the myAI app, i would just get a maxspect gyre. before they came out with the gyre and return pump, i bought a jebao gyre(scp-70). i'm very happy with it, although there is a hum from the vibration that becomes obvious if you're viewing the tank closely

Thank you both. I was looking to replace my Icecap 4k gyres since they would not connect to our new eero mesh wifi, but I was finally able to get them to connect. I might still look at "upgrading" to the Orbits as it would be nice to be able to control everything on my tank via my Apex.

I briefly looked at the Jebao gyres as a cheaper stop gap solution. I use several of their DCP-13000, one DCP-3000 , and one DCP-3500 return pumps in my system and have had nothing but good luck with them.
 

TOP 10 Trending Threads

IF YOU HAD TO OPERATE EVERYTHING ELSE MANUALLY, WHICH AUTOMATED SYSTEM WOULD YOU KEEP?

  • Auto top-off

    Votes: 45 57.0%
  • Automated dosing

    Votes: 6 7.6%
  • Mechanical filtration / roller filter

    Votes: 4 5.1%
  • Automated water testing

    Votes: 3 3.8%
  • Automatic feeding

    Votes: 1 1.3%
  • Lighting schedule

    Votes: 13 16.5%
  • Controller and remote monitoring

    Votes: 3 3.8%
  • Leak detection and emergency shutoff

    Votes: 1 1.3%
  • Automatic water changes

    Votes: 2 2.5%
  • None. I prefer to operate everything manually

    Votes: 0 0.0%
  • Something else (explain in the comments)

    Votes: 1 1.3%
Back
Top
Home
Post thread…
Market
What's new