Gfci...... grounding plug!!
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I don't, but I do have a Hanna CheckTemp thermometer I double check temps with. A decent digital kitchen thermometer can also be used for this.Also would i want to have a thermometer in tank? Im assuming for how much these heaters are they already do that...?
Yes, you could use the InkBird with your AquaTop heater, and would be wise to do soSo I could even use an InkBird with my current heater.
Ok so cleanest look would be getting one with it built in. Mind giving me some good options for that that are user friendly. Loll I've already spent so much money. I feel like ima end up with the helios by im

Sage advice right here.Gfci...... grounding plug!!
One one tank I use an inkbird with two 600 watt BRS titanium heaters.Anything easy to use and reliable close to the level of the helios?
I also have the check temp and use it as my baseline for all other thermometers, controllers, etc.I don't, but I do have a Hanna CheckTemp thermometer I double check temps with. A decent digital kitchen thermometer can also be used for this.
Yes, you could use the InkBird with your AquaTop heater, and would be wise to do so
Welcome to Reefing!
![]()
![]()
![]()
Yes, I use the CheckTemp as my "standard" as well. I also have the Hanna Salinity meter which has a thermometer as well, and the Salinity pen and the CheckTemp are off from each other by a couple tenths of a degree.I also have the check temp and use it as my baseline for all other thermometers, controllers, etc.
Whats that/this?Gfci...... grounding plug!!
Whats thisSage advice right here.
Ground Fault Circuit Interrupter like the outlets found in bathrooms and kitchens. It's a very good idea for safety reasons to power your tank through a GFCI outlet. If you don't have one where your tank is, one can be installed by a qualified electrician, or you can look at options like these:Whats this