Anything else i need to get before delivery/set up?

Also would i want to have a thermometer in tank? Im assuming for how much these heaters are they already do that...?
I don't, but I do have a Hanna CheckTemp thermometer I double check temps with. A decent digital kitchen thermometer can also be used for this.

So I could even use an InkBird with my current heater.
Ok so cleanest look would be getting one with it built in. Mind giving me some good options for that that are user friendly. Loll I've already spent so much money. I feel like ima end up with the helios by im
Yes, you could use the InkBird with your AquaTop heater, and would be wise to do so 🙂

Welcome to Reefing!
money-fireplace.gif


money.gif


just-dumping-money-down-the-drain-kroy-biermann.gif
 
Last edited:
If you put ten very good thermometers in your tank, you will likely still get ten different results. The most important thing is stability, and a heater controller like an InkBird or what's included with the Helios will go a long way towards maintaining a stable temp (in addition to protecting the tank if/when the heater fails). As long as your temp is holding steady, and is in the range of about 76-80 degree F, you should be fine. I shoot for about 77-78 F on my tanks.
 
Anything easy to use and reliable close to the level of the helios?
One one tank I use an inkbird with two 600 watt BRS titanium heaters.

On my main system the Neptune Apex controls the three 600 watt titanium heaters.
I don't, but I do have a Hanna CheckTemp thermometer I double check temps with. A decent digital kitchen thermometer can also be used for this.


Yes, you could use the InkBird with your AquaTop heater, and would be wise to do so 🙂

Welcome to Reefing!
money-fireplace.gif


money.gif


just-dumping-money-down-the-drain-kroy-biermann.gif
I also have the check temp and use it as my baseline for all other thermometers, controllers, etc.
 
I also have the check temp and use it as my baseline for all other thermometers, controllers, etc.
Yes, I use the CheckTemp as my "standard" as well. I also have the Hanna Salinity meter which has a thermometer as well, and the Salinity pen and the CheckTemp are off from each other by a couple tenths of a degree.
 
Whats this
Ground Fault Circuit Interrupter like the outlets found in bathrooms and kitchens. It's a very good idea for safety reasons to power your tank through a GFCI outlet. If you don't have one where your tank is, one can be installed by a qualified electrician, or you can look at options like these:

https://www.homedepot.com/pep/Yello...ZAgUIu98YkQhrCOvWR2qSnC7nBEjAnASsDtfh1Q&gQT=1
https://www.homedepot.com/pep/Yello...dJBsJonMJvv2smoklvbNLgsjb6CkIWySBSaS1Z4&gQT=1
 

HOW MUCH DOES A FISH’S FEEDING REQUIREMENTS AFFECT YOUR STOCKING DECISIONS?

  • A lot! - I avoid fish that require frequent or specialized feeding

    Votes: 5 29.4%
  • Quite a bit, but an automatic feeder can change my answer

    Votes: 3 17.6%
  • It depends on whether my nutrient export can handle it

    Votes: 3 17.6%
  • It depends on how badly I want the fish

    Votes: 5 29.4%
  • Not much. I’m willing to adjust my routine

    Votes: 4 23.5%
  • Not at all. Feeding demands don’t limit my stocking choices

    Votes: 4 23.5%
  • I usually learn about the demanding feeding schedule after buying the fish!

    Votes: 1 5.9%
  • I haven’t really considered this before

    Votes: 0 0.0%
  • Something else (see my comments in the thread)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new