ShaggyRS6
Valuable Member
Hi guys, do you knowing i need anything extra, like I did with my Ecotech pump to connect the tubing on my Waterbox plumbing to it? I think it’s 1 inch flexible hose. Or do I have the fitments just to join right up?
APEX Core 20 pump connection help
- Thread starter ShaggyRS6
- Start date
- Tagged users None
U
User1
Guest
Not sure what exactly you may need but it includes a union. I've added their info and product page below. Side note the Cor 15 and 20 both do. I have three of them 2x 15's and a 20. Love the pumps. Pretty dang rock solid and built like a truck. The body is really well built.
Note from the page:
INCLUDED FITTINGS
The COR comes complete with all the fittings necessary for most aquarium configurations (0.75″ output, 1.0″ input). But we’ve also included a 1.25” union for the output so you can connect the pump in a manner that will result in the least amount of head loss. Plumb your main return-line in 1.25″ and get the full potential of the COR pump – as much as 50% or more flow!
Here is the product page:
Note from the page:
INCLUDED FITTINGS
The COR comes complete with all the fittings necessary for most aquarium configurations (0.75″ output, 1.0″ input). But we’ve also included a 1.25” union for the output so you can connect the pump in a manner that will result in the least amount of head loss. Plumb your main return-line in 1.25″ and get the full potential of the COR pump – as much as 50% or more flow!
Here is the product page:
COR-20 - Intelligent Return Pump for Aquariums
INTELLIGENT, QUIET, ENERGY-EFFICIENT That's right, the COR-20 will run completely standalone OR connected to ANY Apex System via its AquaBus port. If you don't yet have an Apex, don't worry, down the road when you get one, you'll open the door to many more features (like mobile...
www.neptunesystems.com
OP
OP
ShaggyRS6
Valuable Member
Thanks! With the ECOTECH I had to cut some plastic PVC, glue that into the union? Then put the flexible hose over that. I am assuming I will need to do the same?Not sure what exactly you may need but it includes a union. I've added their info and product page below. Side note the Cor 15 and 20 both do. I have three of them 2x 15's and a 20. Love the pumps. Pretty dang rock solid and built like a truck. The body is really well built.
Note from the page:
INCLUDED FITTINGS
The COR comes complete with all the fittings necessary for most aquarium configurations (0.75″ output, 1.0″ input). But we’ve also included a 1.25” union for the output so you can connect the pump in a manner that will result in the least amount of head loss. Plumb your main return-line in 1.25″ and get the full potential of the COR pump – as much as 50% or more flow!
Here is the product page:
COR-20 - Intelligent Return Pump for Aquariums
INTELLIGENT, QUIET, ENERGY-EFFICIENT That's right, the COR-20 will run completely standalone OR connected to ANY Apex System via its AquaBus port. If you don't yet have an Apex, don't worry, down the road when you get one, you'll open the door to many more features (like mobile...www.neptunesystems.com
U
User1
Guest
It is a union, smooth on the inside. No barb if that is what you mean. So if you are using silicon or flex that attaches to a barb then yes, probably. I'm using solid pvc so not sure I'm a good person to ask. If you haven't maybe also check the official Neptune forum on their portal - there is some good info there maybe they have covered this.
Sorry I couldn't be of more help.
OP
OP
ShaggyRS6
Valuable Member
Thanks !
OP
OP
ShaggyRS6
Valuable Member
Where you get that ?I just glued in a 3/4 inch barb into the 1 inch fitting.
OP
OP
ShaggyRS6
Valuable Member
Is 3/4 to one inch or just 3/4
OP
OP
ShaggyRS6
Valuable Member
Nice ! Ordered!
thecodingart
Active Member
I’m guessing one of these? Plus a one inch to 3/4 reducer?
Gray Pipe Adapter Spigot x Barb
Use Street (Spigot) x Barb/Inserts where you want to use flexible tubing. More professional look than white Schedule 40 PVC. This street/spigot barb connector is great for converting plumbing fittings like gate valves or check valves to work with flexible tubing, or when you want to use...
www.bulkreefsupply.com
Last edited:
SaulReef
New Member
Hi! Was that strainer included with the purchase? Mine didn’t come with one!I just glued in a 3/4 inch barb into the 1 inch fitting.
Similar threads
