Apex Help breaker keeps going off

[puccie1]

Can anyone tell me why or what causes Apex Fusion system to goe out once in a while, I have to reset the main controller using reset button (just like a circuit breaker went off). It will work great for a while then start trigger the circuit breaker inside the main controller .
Thanks

 

[HuduVudu]

PFC. You have to much on your controller. Unplug one thing at a time until you find the culprit.

 

[puccie1]

PFC. You have to much on your controller. Unplug one thing at a time until you find the culprit.

It’s done prior when I had only a couple it items plugged in?

 

[HuduVudu]

It’s done prior when I had only a couple it items plugged in?

Unplug until you have nothing plugged in. If it still trips when nothing is on it then it is the controller. If you get on item that you suspect is the culprit remove just it and see if still trips. It is a bit of trial and error, but you need to do it so that you figure out whether it is something you are plugging or if it is the Apex.

 

[puccie1]

Unplug until you have nothing plugged in. If it still trips when nothing is on it then it is the controller. If you get on item that you suspect is the culprit remove just it and see if still trips. It is a bit of trial and error, but you need to do it so that you figure out whether it is something you are plugging or if it is the Apex.

thank you