gms1234
Community Member
- Joined
- Jun 20, 2023
- Messages
- 79
- Reaction score
- 49
- Location
- Australia
- What state or country do you live in
- Australia
Hi all,
Basically on occasion when the ambient air temperature is high my chiller overheats and alarms, however once this happens the the chiller won't work again until power cycled.
I use an output on the apex to turn chiller on and off based on temperature.
I want to incorporate some programing when it gets above a higher temperature and not cooling them to power cycle for 1 min the go back.
Current program is
Fall back On
If temp >25.3 then on
If temp < 25.0 then off.
Plan would be if above 25.5 then turn off for 1 min. Maybe once a hour.
Regards,
Glenn
Basically on occasion when the ambient air temperature is high my chiller overheats and alarms, however once this happens the the chiller won't work again until power cycled.
I use an output on the apex to turn chiller on and off based on temperature.
I want to incorporate some programing when it gets above a higher temperature and not cooling them to power cycle for 1 min the go back.
Current program is
Fall back On
If temp >25.3 then on
If temp < 25.0 then off.
Plan would be if above 25.5 then turn off for 1 min. Maybe once a hour.
Regards,
Glenn
