Apex program for kalk reactor/dos?

[Alberta79]

I have recently installed a Icecap kalkwasser reactor and a neptune DOS. How do I program the Apex to power the reactor for 1 min every 6 hours while turning the DOS off during this time plus 15min? Through research I have found how to power the reactor but not sure how to power down the DOS. Thank you for your help.

 

[SuncrestReef]

For the reactor:

[Kalk]
Fallback OFF
OSC 000:00/001:00/359:00 Then ON

For the DOS, add this line under the Advanced tab for each DOS head:

If Output Kalk = ON Then OFF
Min Time 016:00 Then OFF

See my tutorial on Apex Timers for details on both the OSC and Min Time commands:

Neptune Apex Programming Tutorials, Part 2: Timers

Part 2 of a series on learning how to program your Neptune Apex. Today's article is all about timers: OSC, If Time, DOW, Defer, When, and Min Time.

www.reef2reef.com

 

[Alberta79]

Awesome!!

Thank you so much.