Apex RO Solenoid Valve

[arranms96]

Hi Guys,

I want to be able to turn my RO/DI output on and off via my apex (eventually automate it with a level sensor) , currently I do it manually via a ball valve.

I've purchased a FMM and a Solenoid Valve, I'm not sure if there is anything else I need? I see there is a power supply for the FMM which needs to be purchased separately.

I cant find any documentation on how to configure/setup the Solenoid valve within my Apex?

Any advice massively appreciated.

 

[Heabel7]

There is a 24v switch on the power par. No need to add power to the FMM module. The FMM module will read the water level off of the LLS without the additonal power. If you dont have a sensor the FMM is not needed.

I use a LLS and Neptune Solenoid to regulate my RODI into my sump. The water is pumped through a float valve as a backup. I do it this way because i dos Kalk overnight. I need to make sure that the chamber is not too full when dosing starts.