Apex update instantly changed flow meter by 300 gph

[14 foot reef]

Apex update instantly changed flow meter by 300 gph

After update on Apex, flow meter dropped from 1650 GPH to 1330 GPH. nothing else changed, this flow meter has been dead on perfect for 6 months running between 1625-1650 religiously. Any thoughts ?

 

[blaxsun]

None. You should definitely put a support ticket into Neptune though.

 

[Angrywalnut]

My FMM required update after Main update was finished. It was off by 80 from what it was. Try unplugging
FMM module aquabus cable for 5 to 7 seconds. It fixed mine.

https://forum.neptunesystems.com/showthread.php?32987-AOS-5-10_8A22-has-been-released

 

[DCR]

It may have changed the configuration to a different size meter.

 

[David_CO]

My FMM required update after Main update was finished. It was off by 80 from what it was. Try unplugging
FMM module aquabus cable for 5 to 7 seconds. It fixed mine.

https://forum.neptunesystems.com/showthread.php?32987-AOS-5-10_8A22-has-been-released

A FMM reboot will fix it, I had the same issue.

 

[14 foot reef]

My FMM required update after Main update was finished. It was off by 80 from what it was. Try unplugging
FMM module aquabus cable for 5 to 7 seconds. It fixed mine.

https://forum.neptunesystems.com/showthread.php?32987-AOS-5-10_8A22-has-been-released

DUDE !!!!!!!!
100% fixed my issue, UV right back to 1650 gph
Thanks so much...... You should post this on the Neptune thread

 

[14 foot reef]

After update, now my PH probe is reading 0.00 always reads 34 - 34.5 and ORP is reading 50..My ORP is normally 350-375.