Hanna Phosphate ULR Tester - reagent change

stevenc23

Community Member
View Badges
Joined
Mar 17, 2026
Messages
34
Reaction score
40
Location
Colorado
What state or country do you live in
Colorado
Rating - 0%
0   0   0
Just got an email from Hanna stating that "Due to a supply chain issue, we had to switch our supplier for our Phosphate and Phosphorus ULR Reagents and make a minor modification to the testing procedures."

Linked video and literature now shows the Tester using 2 different reagents. First adding Sulfamic Powder and then adding an Indication Reagent.

Curious if the the test is same basic reaction with reagents divided into 2 packets or they have changed the actual test methodology?
 
If they would use a different reaction or a different composition of chemicals, you would need a new checker because the translation from "light absorbance" your checker actually measures to "ppm PO₄" would be different.

I can't imagine they have found other reagents that just so happen to have the exact same light absorbance at 525nm from 0.00ppm to 0.90ppm and don't require an adjustment of the whole checker, so I assume you are just getting the reagents in two different little packages.
 
Just got an email from Hanna stating that "Due to a supply chain issue, we had to switch our supplier for our Phosphate and Phosphorus ULR Reagents and make a minor modification to the testing procedures."

Linked video and literature now shows the Tester using 2 different reagents. First adding Sulfamic Powder and then adding an Indication Reagent.

Curious if the the test is same basic reaction with reagents divided into 2 packets or they have changed the actual test methodology?
Can you post the email and link?
 
FWIW AI search:

the older single-packet version (HI774-0) did not use sulfamic acid. Instead, it relied on potassium disulfate (potassium pyrosulfate) to acidify the water sample. [1]
In the updated two-packet system, Hanna Instruments replaced that single acidic blend with a dedicated sulfamic powder packet alongside the HI774IND-0 indicator packet.

Both the old single-packet (HI774-0) and new two-packet (Sulfamic Powder + HI774IND-0) reagents deliver the exact same rated accuracy of ±0.02 ppm ±5% of reading across the 0.00 to 0.90 ppm range, as the meter's optical calibration and underlying Ascorbic Acid Method remain unchanged. However, adding a dedicated sulfamic acid pre-step improves real-world consistency and specifically targets nitrite interference.
 
FWIW AI search:

the older single-packet version (HI774-0) did not use sulfamic acid. Instead, it relied on potassium disulfate (potassium pyrosulfate) to acidify the water sample. [1]
In the updated two-packet system, Hanna Instruments replaced that single acidic blend with a dedicated sulfamic powder packet alongside the HI774IND-0 indicator packet.

Both the old single-packet (HI774-0) and new two-packet (Sulfamic Powder + HI774IND-0) reagents deliver the exact same rated accuracy of ±0.02 ppm ±5% of reading across the 0.00 to 0.90 ppm range, as the meter's optical calibration and underlying Ascorbic Acid Method remain unchanged. However, adding a dedicated sulfamic acid pre-step improves real-world consistency and specifically targets nitrite interference.
Ah, okay in that case it makes sense because you can get an equivalent reaction that doesn't change the coloration because it's "just" the acidification step. The underlying ascorbic acid method is still being used though.
 
Well this sucks, first world problems I know. I have enough old packets to go awhile without needing to order the new ones.

Pain for me being blind as a bat. I’ll need to reorganize my workflow (and my decrepit memory) to know what’s what.

Thanks for bringing this up! I would have just assumed I was getting a freebie with the extra packets.
 
However, adding a dedicated sulfamic acid pre-step improves real-world consistency and specifically targets nitrite interference.



Sorts of puts the lie to specifications if “real world” experiences were the problem. lol

I’m not understanding how it targets nitrite interference.
 
However, adding a dedicated sulfamic acid pre-step improves real-world consistency and specifically targets nitrite interference.



Sorts of puts the lie to specifications if “real world” experiences were the problem. lol

I’m not understanding how it targets nitrite interference.
And like adding another step lowers the “real world” human error factor
 
However, adding a dedicated sulfamic acid pre-step improves real-world consistency and specifically targets nitrite interference.



Sorts of puts the lie to specifications if “real world” experiences were the problem. lol

I’m not understanding how it targets nitrite interference.
Just to clarify, this was from AI, not Hanna
 
Something not right there.
That would be a dumb move on Hanna’s part.
It’s already a pain to get powder out of one packet, let alone two, and for years, it’s given consistent results with just one.

Crazy.
 
Agreed, call me skeptical but the supply chain rational sounds like a poor excuse for what’s really going on. Was there a run on potassium pyrosulfate?
 
However, adding a dedicated sulfamic acid pre-step improves real-world consistency and specifically targets nitrite interference.



Sorts of puts the lie to specifications if “real world” experiences were the problem. lol

I’m not understanding how it targets nitrite interference.
I checked so you don't have to:

Under acidic conditions, nitrite becomes nitrous acid: NO₂⁻ + H⁺ → HNO₂

Sulfamic acid is H₂NSO₃H, and the two react:
HNO₂ + H₂NSO₃H → N₂↑ + H₂SO₄ + H₂O

So the nitrite is destroyed and leaves as nitrogen gas. According to Standard Methods (4500-P E), 1ppm NO₂⁻ makes the result about 3% low, so in a cycled reef tank the actual interference is probably a joke.

Good marketing though 😁
 
Thanks for the heads up. This is the first I've seen this.
It'll be interesting to see what people think of the results with the new reagents.
*I'm running around 0.20 ppm these days so likely won't notice anything but I wonder if those running in the lower range happen to notice any difference
 

TOP 10 Trending Threads

HOW WOULD YOU FEEL ABOUT RECEIVING A FISH OR CORAL AS A HOLIDAY GIFT?

  • I’d love one, as long as it’s a species I chose

    Votes: 13 34.2%
  • I’d trust someone who knows my tank to choose

    Votes: 0 0.0%
  • I’d rather get a gift card and pick it myself

    Votes: 14 36.8%
  • I’d prefer gear or supplies instead

    Votes: 0 0.0%
  • Please don’t surprise me with livestock

    Votes: 11 28.9%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new