AZMSGT build thread

[Michael Gray]

love the setup so far. how much rock is that (lbs? and dimensions of your tank. im wondeirng if 100lbs of macro and about 4 foundation pieces (flat on bottom) is overkill for my 4x2 WB

 

[vangvace]

Nice build. Is the tank fully against the wall and have you considered doing the gate valve mod to replace the red sea valve?

 

[AZMSGT]

love the setup so far. how much rock is that (lbs? and dimensions of your tank. im wondeirng if 100lbs of macro and about 4 foundation pieces (flat on bottom) is overkill for my 4x2 WB

Not positive on the weight, it’s about 130lbs. I have 6 flat bottom pieces and 2 that are on top for corals.

 

[AZMSGT]

Nice build. Is the tank fully against the wall and have you considered doing the gate valve mod to replace the red sea valve?

There is about 3” behind the tank to the wall. I have the parts for the gate valve on the drain line. However I am waiting for more plumbing parts to arrive to finish things up on the plumbing. Once I have it finished underneath I’ll get more pictures and description of what I did and why.

 

[AZMSGT]

View attachment 1126472
My wife is tired of my mess. Waiting for a couple parts that will be here Friday.

 

[Michael Gray]

ahahah my office is identical!

 

[AZMSGT]

Got the manifold built and installed. I’m going to feed it with a dedicated pump. This way the return line gets it’s own pump. Also mounted the 40w UV to the side. It will circulate water within the sump.
The incoming fitting to the manifold is a 3/4” barb. The UV is also 3/4” Barbs.
The 1/2 barbs will feed an algae scrubber, carbon, gfo and what ever else.

View attachment 1129691
View attachment 1129692
View attachment 1129693

Long term plan is to move the UV into a cabinet that will be next to the tank.

 

[AZMSGT]

More progress.

I added water to the tank and started it cycling. It’s got Dr Tims and Microbacter7 in it. The MP-40s are running to provide flow.
View attachment 1131271

Also been working on the dry side of the cabinet. Mounted most of the power supplies and controls.
View attachment 1131272

I can’t run the sump till I clamp the main return line. The clamp I need(want) will be here Thursday to secure the return line. Once that is secure, I’ll be able to get the sump running. It’s all about steps to get to the end.

View attachment 1131277

Also installed LED under cabinet lights.
View attachment 1158834

 

[Sisterlimonpot]

Inching closer to the finish line! Looking good!

Btw, my wife stopped nagging me on fish mess, she realized even with my best efforts, there's going to be fish clutter.

Hopefully, eventually, as I get comfortable with what I have and stop tinkering and adding equipment, I will get rid of the clutter... I'm just not there yet!

Another note, if you ever invite me over, I have a tank warming gift for you.

 

[AZMSGT]

Inching closer to the finish line! Looking good!

Btw, my wife stopped nagging me on fish mess, she realized even with my best efforts, there's going to be fish clutter.

Hopefully, eventually, as I get comfortable with what I have and stop tinkering and adding equipment, I will get rid of the clutter... I'm just not there yet!

Another note, if you ever invite me over, I have a tank warming gift for you.

Thanks,

Still a little ways from inviting folks over to see the tank up and running. Heck, the room it's in is our front room adjacent to the front door. I need to get it all cleaned up. It's coming along though.

 

[AZMSGT]

Water in the sump and circulating through the entire system.
View attachment 1133337

More work needs to be done once my goodies get here.

 

[AZMSGT]

Time to get the skimmer height adjusted. As is it’s sitting far to low in the water.
View attachment 1133962

Built a little stand out of 3/4” PVC and egg crate.

View attachment 1133969
View attachment 1133970

Now the Skimmer is where it should be. Well it also needs to break in some too.

View attachment 1133973

 

[AZMSGT]

Tank has bacteria building up.
In the mean time I have everything up and running. Lights are going to stay off for a while.

BRS carbon reactor is mounted to 80/20 aluminum. The skimmer is shut off to let the bacteria grow. Also have some foam filters in place for future hospital and QT needs.
View attachment 1138911

That’s a Clearwater CW200 algae scrubber. It will run opposite times of the main lights.
View attachment 1138912

A pic of the entire system up and running.
View attachment 1138913

Pentair 40w UV light mounted to the exterior.
View attachment 1138918

 

[AZMSGT]

Here’s the power cabinet such as it is. Once I have more GHL equipment I’ll neaten things up.
View attachment 1138933

Gratuitous wet shot of the tank.
View attachment 1138935

 

[AZMSGT]

In the mean time my QT is up and running. We put these two guys in last week.
View attachment 1138945
View attachment 1138946

I know the tank decoration is silly, wife wanted it.... really she did.
View attachment 1138947

Unless something goes really bad this will be the last post till I get the DT cycle done. Approx, 7 weeks from now.

 

[Epic Aquaculture]

Looking good! I forgot to send you pics of the water level in my sump, but it's the same as your water level...

 

[AZMSGT]

I forgot to send you pics of the water level in my sump, but it's the same as your water level...

It’s ok, I managed to get it all figured out. I had it to full originally. After I removed nearly 2 gallons from the sump things ran better.

 

[vangvace]

Have you turned off your return pump and checked that your sump doesn't flood?

 

[AZMSGT]

Have you turned off your return pump and checked that your sump doesn't flood?

Yup, I’ve got lots of extra space when off. Thanks for the reminder though.

 

[AZMSGT]

Finished up my Fancy Mixing station. Aquatop Heater, Tunze Powerhead. Yep, that temp of 89 is of the water coming out of my RO system. The heater isn't even set to turn on till 77 degrees... Gotta love Arizona.
View attachment 1142350

Everything is attached to the barrel with these fasteners. They work very well. Used them also on my Powersupplies in my electrical cabinet.

View attachment 1142351

Zoom in.. It's not Velcro. Both sides are the same.
View attachment 1142352