- Joined
- Jan 23, 2019
- Messages
- 28
- Reaction score
- 37
Hi Reefers,
Cycling a new bare bottom tank 395L with a dr tims fishless cycle, at day 48 of the cycle and ammonia been constantly zero for the last 27 days, apart from the initial dr tims ammonium dose at day 0 and was detectable for about 20 days 0.25ppm on the 2nd day then ranged from 0 to 0.5ppm with a spike on day 5 of 1.5ppm then from there its gone gradually gone to zero around day 20 on a salifert kits just milky cloudy water now
Nitrites been stuck at 0.5ppm since day 20 with 4 spikes on days 20,27,47,48 to 1.0ppm but last few weeks every day nearly has been 0.5ppm at day 38 chagpt said to try and give it a shunt/bump so dosed more dr tims ammonia at 0.5ppm the tank consumed it all by the next day (24hrs) but nitrites still stuck at 0.5ppm since ORP been at 285 now with a peak of 300 for a couple weeks,
day 47 and 48 nitrites seem to have crept up but it might be just my eyes misinterpreting the pink colour its a smidge darker than the 0.5ppm of the chart so would say somewhere in between 0.5 to 0.75pmm 1.0 at the absolute highest- I'm leaning towards eye and colour fatigue
My question is should i just be waiting it out more for nitrites to get below 0.2ppm to do the 2ppm final ammonia dose for the 24 hour challenge?
or is the tank cycled and do the 2ppm ammonia chloride challenge as thinking the nitrites are just stuck ( testing on salifert kit) the tank is bare bottom but has 135 maxspect bio balls and 4x maxpect nano tech blocks and 4 arka caves (ceramic media) 10 plastic media balls,
running no filtration at the moment while it cycles, currently skimmer on but I'm not taking any skim out just shallow running to increase oxygenation of the water and to run the new skimmer in
tank temp being run at 26 degrees Celsius for the cycle
no water changes either
cheers and thank you
Cycling a new bare bottom tank 395L with a dr tims fishless cycle, at day 48 of the cycle and ammonia been constantly zero for the last 27 days, apart from the initial dr tims ammonium dose at day 0 and was detectable for about 20 days 0.25ppm on the 2nd day then ranged from 0 to 0.5ppm with a spike on day 5 of 1.5ppm then from there its gone gradually gone to zero around day 20 on a salifert kits just milky cloudy water now
Nitrites been stuck at 0.5ppm since day 20 with 4 spikes on days 20,27,47,48 to 1.0ppm but last few weeks every day nearly has been 0.5ppm at day 38 chagpt said to try and give it a shunt/bump so dosed more dr tims ammonia at 0.5ppm the tank consumed it all by the next day (24hrs) but nitrites still stuck at 0.5ppm since ORP been at 285 now with a peak of 300 for a couple weeks,
day 47 and 48 nitrites seem to have crept up but it might be just my eyes misinterpreting the pink colour its a smidge darker than the 0.5ppm of the chart so would say somewhere in between 0.5 to 0.75pmm 1.0 at the absolute highest- I'm leaning towards eye and colour fatigue
My question is should i just be waiting it out more for nitrites to get below 0.2ppm to do the 2ppm final ammonia dose for the 24 hour challenge?
or is the tank cycled and do the 2ppm ammonia chloride challenge as thinking the nitrites are just stuck ( testing on salifert kit) the tank is bare bottom but has 135 maxspect bio balls and 4x maxpect nano tech blocks and 4 arka caves (ceramic media) 10 plastic media balls,
running no filtration at the moment while it cycles, currently skimmer on but I'm not taking any skim out just shallow running to increase oxygenation of the water and to run the new skimmer in
tank temp being run at 26 degrees Celsius for the cycle
no water changes either
cheers and thank you
Last edited:
