Bayer coral dip question

Parasite1971

Community Member
View Badges
Joined
Nov 10, 2019
Messages
62
Reaction score
80
What state or country do you live in
Indiana
Rating - 0%
0   0   0
For those of you that use Bayer to dip your corals. What ratio do you use? I have seen 1 oz to 1 cup of tank water but just want to be sure. Also how long?

Thank you and happy reefing!
 
Last edited:
10:1 sounds about right. 5 to 7 mins for me
 
I think folks use too much Bayer for dipping. They get away with this because it is gentle on the corals and even though it's at high doses, doesn't negatively impact the corals.

The original dosing video that was done with Bayer was 0.8 mls per 100 mls of tank water. To simplify, I do 1 ml per 100 mls, and typically make up 300 mls for doing a couple frags.

I dip for 15-20 minutes, with occasional agitation. Here's the important thing...you need to thoroughly rinse so you don't introduce the dip into your tank. This is two, 15 minute rinses with tank water, discarding after each rinse.

If interested, I did a survey a number of years ago, and HERE's the summary of what folks are dosing.
 
I think folks use too much Bayer for dipping. They get away with this because it is gentle on the corals and even though it's at high doses, doesn't negatively impact the corals.

The original dosing video that was done with Bayer was 0.8 mls per 100 mls of tank water. To simplify, I do 1 ml per 100 mls, and typically make up 300 mls for doing a couple frags.

I dip for 15-20 minutes, with occasional agitation. Here's the important thing...you need to thoroughly rinse so you don't introduce the dip into your tank. This is two, 15 minute rinses with tank water, discarding after each rinse.

If interested, I did a survey a number of years ago, and HERE's the summary of what folks are dosing.

What exactly do you mean by rinses? After dipping I always dip them in tank water, then pour different tank water over the frag. Not for 15 mins though.
 
What exactly do you mean by rinses? After dipping I always dip them in tank water, then pour different tank water over the frag. Not for 15 mins though.

Once it's done in the dip, I'll put the frag(s) in another cup with a couple 100 mls of tank water and occasionally swirl for about 15 minutes or so. I then repeat this for a total of two rinses.

Again, you don't want any residual dip to get into you tank.
 

TOP 10 Trending Threads

WHICH PART OF YOUR SETUP IS HARDEST TO REACH OR REMOVE FOR ROUTINE MAINTENANCE?

  • Glass behind or beside the tank

    Votes: 9 23.1%
  • Powerheads or wavemakers

    Votes: 3 7.7%
  • Sump or rear filtration chambers

    Votes: 5 12.8%
  • Skimmer or other filtration equipment

    Votes: 4 10.3%
  • Overflow or plumbing

    Votes: 8 20.5%
  • Lights or lids

    Votes: 0 0.0%
  • Mine is pretty easy to access!

    Votes: 9 23.1%
  • Other—tell us what I missed

    Votes: 1 2.6%
Back
Top
Home
Post thread…
Market
What's new