We are still in lock down so it hard to source parts loacally.
Still ordering bits...
Ordered... fingers crossed it is the right one, looks like it.
- 3-4 sheets of 5mm A4 size white perspex acrylic (I buy pre-cut A4 size acrylic as it's cheaper)
- 18x ball bearings 4mm/13mm ID/OD
- M4 countersunk screws and M4 nuts - have
- M3 screws - have
- Tensol 12 acrylic glue
- Arctic F8 PWM cooling fan (80mm diameter) - Purchased $22 NZ
- Rotary encoder
- Mean Well Constant Voltage LED Driver 25.2W 12V
- Murata Power Solutions Through Hole Switching Regulator, 5V dc Output Voltage, 1.5A Output Current
- TMC2209 v1.2 stepper motor driver - Purchased $16 NZ
- Arduino Nano
- Samsung IC2 SSD1306 OLED DIsplay x 2 = 13nz
- Santoprene tubing 3.2mm bore x 6.4mm OD - purchased $53.85 NZ for 1m
- Push-on straight connector,5mm ID hose
- JST crimp connectors
- 22 AWG wires - have
- 100uf 24V capacitor
- 90 degree angle mini USB male to female extension connector (30cm length)
- C14 panel mount power connector
- 2x RS PRO M8 x 30mm Shoulder Bolt - 4 purchased China $16 NZ
- 2x Easyfix A2 stainless steel flange head nuts - have
- 10x Easyfix A2 stainless steel large flat washers M8 x 2mm - have
- 4x M3 washers- have
- Nema 17 stepper motor, 0.71NM 1.8A - Purchased $31 NZ
Still ordering bits...
Ordered... fingers crossed it is the right one, looks like it.
- 3-4 sheets of 5mm A4 size white perspex acrylic (I buy pre-cut A4 size acrylic as it's cheaper)
- 18x ball bearings 4mm/13mm ID/OD
- M4 countersunk screws and M4 nuts - have
- M3 screws - have
- Tensol 12 acrylic glue
- Arctic F8 PWM cooling fan (80mm diameter) - Purchased $22 NZ
- Rotary encoder
- Mean Well Constant Voltage LED Driver 25.2W 12V
- Murata Power Solutions Through Hole Switching Regulator, 5V dc Output Voltage, 1.5A Output Current
- TMC2209 v1.2 stepper motor driver - Purchased $16 NZ
- Arduino Nano
- Samsung IC2 SSD1306 OLED DIsplay x 2 = 13nz
- Santoprene tubing 3.2mm bore x 6.4mm OD - purchased $53.85 NZ for 1m
- Push-on straight connector,5mm ID hose
- JST crimp connectors
- 22 AWG wires - have
- 100uf 24V capacitor
- 90 degree angle mini USB male to female extension connector (30cm length)
- C14 panel mount power connector
- 2x RS PRO M8 x 30mm Shoulder Bolt - 4 purchased China $16 NZ
- 2x Easyfix A2 stainless steel flange head nuts - have
- 10x Easyfix A2 stainless steel large flat washers M8 x 2mm - have
- 4x M3 washers- have
- Nema 17 stepper motor, 0.71NM 1.8A - Purchased $31 NZ