Bought a used tank...need some over flow advice

Scubasteve11

Active Member
View Badges
Joined
Jan 13, 2019
Messages
205
Reaction score
126
Rating - 0%
0   0   0
Hi All,

I found a deal on Craigslist I couldn't pass up. I've only been in the hobby for a year with an AIO tank. Ive been looking for something a little larger with a sump and this is what I found....

The tank came with a 2 3/4" overflow and 1 3/4" return holes pre drilled. Ideally, I would like to somehow convert this to an external overflow with dual return lines. Looking for any advice or ideas on the best way to get this setup...

Any help would be much appreciated.

IMG_20191130_150348.jpg IMG_20191130_144631.jpg
 
You could remove the overflow box.
Look at something like Eshopps Eclipse Overflow Box Kits
You will have to check what size bulk heads they use and see if your current hole will fit one.
Then you will have to drill a second hole.
 
You could remove the overflow box.
Look at something like Eshopps Eclipse Overflow Box Kits
You will have to check what size bulk heads they use and see if your current hole will fit one.
Then you will have to drill a second hole.
Thanks
You could remove the overflow box.
Look at something like Eshopps Eclipse Overflow Box Kits
You will have to check what size bulk heads they use and see if your current hole will fit one.
Then you will have to drill a second hole.
Thanks. I was looking at the Eshopps earlier but couldn't find the bulkhead size. I'll check with BRS.
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.5%
  • Fish or coral food

    Votes: 5 5.4%
  • Test kits or reagents

    Votes: 10 10.9%
  • Filter media or replacement fleece

    Votes: 5 5.4%
  • RO/DI filters or supplies

    Votes: 14 15.2%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 10.9%
  • I keep a backup of everything

    Votes: 24 26.1%
  • Other (Post in the comments)

    Votes: 7 7.6%
Back
Top
Home
Post thread…
Market
What's new