Breakout box won't trigger salt pump in to turn on.

[14 foot reef]

Breakout box won't trigger salt pump in to turn on.
I have a common float switch hooked to one of my breakout boxes. If my sump low triggers, it will turn off my main feed pump. But I can not get it to turn on my "Salt water in" pump on another EB832, nor can I get it to turn on my sump light.

It will turn off and on a big MRC 6100 but it won't turn on my sump light or salt in pump.
Here is my programming

This is main pump program and functions perfectly

Fallback ON
Set ON
If FeedA 000 Then OFF
If SMPLO2 CLOSED Then OFF
If HW13_1 OPEN Then OFF
If HW13_2 OPEN Then OFF
If LD14_3 CLOSED Then OFF
If LD14_4 CLOSED Then OFF

Here is "salt in pump" program

If SMPLO2 CLOSED Then ON

This is so simple, why doesn't it turn pump on? I can manual turn on this pupm from APEX, It just won't except a command code.

Thanks in advance