Bubble magus dosing conformation?

[Reefltx]

So, I just got my bubble magus bm T01 dosing pump in today and the settings are alittle confusing because its a lot diff from my other dosing pump, which can be set to dose at a certain time and amount down to secs. So, lets say I want to dose 60ml on pump 1


Sent from my iPhone using Tapatalk

 

[Reefltx]

Oops, didn't realized the thread was made up while I was on my phone and didn't get a chance to finish.


Anyways, someone please confirm I've set the dosing correctly. I'm dosing just alk & cal., 60ml of each per day.

Here's my settings ..
Pump 1 - ml/DAY "P1:0060", CYCL/DAY "P1 12", START "00:00"
Pump 2 - ml/Day "P2:0060", CYCL/DAY "P2 12", START "01:05"

My understanding is that the BM automatically adjust to dose 5ml x 12 times per day every 2hrs? Hopefully it's not 60ml every 2hrs. :squigglemouth:

 

[impur]

Yes your settings should dose a total of 60mL per day and will be done so over 12 seperate doses. Keep in mind your settings will have the unit dosing both alk and calcium at the same time for some of them, so i would advise you to have the outputs away from one another to avoid any precipitation.

 

[Reefltx]

Yes your settings should dose a total of 60mL per day and will be done so over 12 seperate doses. Keep in mind your settings will have the unit dosing both alk and calcium at the same time for some of them, so i would advise you to have the outputs away from one another to avoid any precipitation.

But, the start time are an hour a part?

 

[impur]

haha good point didn't even think of that. You should be good to go :D