Calcium 500+ and Alkalinity 6.5

kashman100

Well-Known Member
View Badges
Joined
Jun 19, 2016
Messages
589
Reaction score
330
Rating - 0%
0   0   0
I switched to Jaebo dosing pumps 2 months ago for dosing 2 part. I calibrated both dosing pumps and everything was fine for a while. I took a 2 week vacation and noticed the calcium was being used up faster. So now I tested and came up with calcium 500+ with red sea(Maybe 700+ because I used a full syringe and another half before the color changed). And 6.5 Alkalinity. I have Sps, Lps and anemones and it all looks great. Should I just stop dosing the calcium and test daily until it falls back into range? Other suggestions? My Alk was running at 8.5 consistantly before this.
 
I switched to Jaebo dosing pumps 2 months ago for dosing 2 part. I calibrated both dosing pumps and everything was fine for a while. I took a 2 week vacation and noticed the calcium was being used up faster. So now I tested and came up with calcium 500+ with red sea(Maybe 700+ because I used a full syringe and another half before the color changed). And 6.5 Alkalinity. I have Sps, Lps and anemones and it all looks great. Should I just stop dosing the calcium and test daily until it falls back into range? Other suggestions? My Alk was running at 8.5 consistantly before this.
Magnesium 1450
 
I got in the same situation like u too. But I’m using Ca Reactor. I tune the reactor to really minimal and start adding Alk manually to try and bring the alk back up. Mine is a mix tank with sps lps anemone too. Everything currently is looking good so I’m just going to keep monitoring.
f3ac156097befb69ce6891a0bfab3a72.jpg

e98516e2c8ce7c4d3ff5caea7af0013b.jpg

1f4be5f642bbab44f2de9e20b5140de6.jpg
 
I switched to Jaebo dosing pumps 2 months ago for dosing 2 part. I calibrated both dosing pumps and everything was fine for a while. I took a 2 week vacation and noticed the calcium was being used up faster. So now I tested and came up with calcium 500+ with red sea(Maybe 700+ because I used a full syringe and another half before the color changed). And 6.5 Alkalinity. I have Sps, Lps and anemones and it all looks great. Should I just stop dosing the calcium and test daily until it falls back into range? Other suggestions? My Alk was running at 8.5 consistantly before this.

This seems like a reasonable solution, but you'll have to figure out why the numbers got out of sync in the first place. A second test kit to rule out testing error wouldn't be a bad idea. Have you tested both pumps to verify they're dosing the amount you expect? Are you dosing equal amounts of both per day?
 
It ended up that the calcium was being dosed more. So I'm leaving the calcium off and only dosing alk. The calcium is coming down so that's good. So I guess I will recalibrate the jaebo and keep a close eye on it once I start dosing again
 

TOP 10 Trending Threads

WHAT KIND OF REEFING DEAL ARE YOU HOPING TO PICK UP THIS BLACK FRIDAY?

  • A whole new aquarium or complete system

    Votes: 4 14.8%
  • Lighting, pumps, or other major equipment

    Votes: 4 14.8%
  • Controllers, testing, dosing, or automation gear

    Votes: 2 7.4%
  • Dry goods and restocks, like salt, media, or food

    Votes: 2 7.4%
  • Corals! Must...Have...CORALS!!!

    Votes: 7 25.9%
  • Fish or other livestock

    Votes: 1 3.7%
  • Rock, sand, or other aquascaping supplies

    Votes: 1 3.7%
  • I’m browsing, but don’t have a specific target

    Votes: 4 14.8%
  • I’m not shopping for reef deals this year

    Votes: 1 3.7%
  • Other (Post in the comments)

    Votes: 1 3.7%
Back
Top
Home
Post thread…
Market
What's new