Calculating Pump Loss

Huskymaniac

Valuable Member
View Badges
Joined
Oct 31, 2017
Messages
1,587
Reaction score
818
What state or country do you live in
New Jersey
Rating - 0%
0   0   0
Is there an online calculator that helps calculate pump head loss? I plumbed a 120 watt pentair uv sterilizer and am trying to dial in the flow through the unit at roughly 600- 800 gph. I have a Jebao DCP 8000 and figured through the 8ft of tubing I am around 1000 Gph. That doesn't account for reducing the piping from 1 1/4 to 1 inch and 4 right angles. This is on a reefer 750 and know the max flow they can handle through the overflow is 600ph or flow so I wonder if that will be my best gauge?
 
Is there an online calculator that helps calculate pump head loss? I plumbed a 120 watt pentair uv sterilizer and am trying to dial in the flow through the unit at roughly 600- 800 gph. I have a Jebao DCP 8000 and figured through the 8ft of tubing I am around 1000 Gph. That doesn't account for reducing the piping from 1 1/4 to 1 inch and 4 right angles. This is on a reefer 750 and know the max flow they can handle through the overflow is 600ph or flow so I wonder if that will be my best gauge?


Check this out:
90A9CB8A-2582-44D5-B846-F998C53BC998.jpeg
 
Can you measure the amount that comes out into the aquarium into a container over 10 seconds and then calculate gph from there?
 
Can you measure the amount that comes out into the aquarium into a container over 10 seconds and then calculate gph from there?

Good idea but the return is split into the tank and hard plumbed. Not going to be really easy.
 
I guess the most important question is how much flow is reduced on a dc pump by reducing the power by 50%. Does that automatically equate to a 50% reduction in Gph?
 
I guess the most important question is how much flow is reduced on a dc pump by reducing the power by 50%. Does that automatically equate to a 50% reduction in Gph?

I wouldn’t bet on it. But, I can’t really say.

How about measuring from one split, and then the other?
 
Problem is its hard plumbed so really cant lift the nozzle up high enough to get a bucket under it.
 

TOP 10 Trending Threads

HOW DO YOU HANDLE HOLIDAY DECORATING AROUND YOUR REEF?

  • I decorate the tank or stand

    Votes: 1 8.3%
  • I decorate AROUND the tank or stand

    Votes: 1 8.3%
  • I add one small seasonal touch but keep it very basic

    Votes: 0 0.0%
  • I take a holiday photo, but don’t decorate the space

    Votes: 0 0.0%
  • I leave the reef area as it is

    Votes: 9 75.0%
  • We don’t decorate for the holidays

    Votes: 1 8.3%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new