Calibrating inkbird

  • Thread starter Thread starter Marc2952
  • Start date Start date
  • Tagged users Tagged users None

Marc2952

Valuable Member
View Badges
Joined
Nov 23, 2019
Messages
1,539
Reaction score
952
What state or country do you live in
New York
Rating - 0%
0   0   0
I got the inkbire ITC-306A and when i put it on the tank i noticed it was reading 80.7 even though my other 2 thermometers where reading 78-77.6. So i decided to do the ice cup trick to check the proves and infact the inkbird was reading 34 when it should read 32 exactly. I heard that is a good way to test it, has anyone else done that aswell?
 
If you are using ice cubes and water 34 degrees is about right. Grind the ice in a blender- what you have to make is called a slurry; which is basically slush. 3 parts crushed ice to 1 part water. Let it sit for a couple of minutes. But even that often reads higher than 32F.
 
If you are using ice cubes and water 34 degrees is about right. Grind the ice in a blender- what you have to make is called a slurry; which is basically slush. 3 parts crushed ice to 1 part water. Let it sit for a couple of minutes. But even that often reads higher than 32F.
Interesting i always heard of jist stirring the icecubes in the water and after 3 minutes stirr again and put the thermometer in.
 
If you are using ice cubes and water 34 degrees is about right. Grind the ice in a blender- what you have to make is called a slurry; which is basically slush. 3 parts crushed ice to 1 part water. Let it sit for a couple of minutes. But even that often reads higher than 32F.
Also i just checked with 2 thermometers and the inkbird and this is what i got so i guess the one on the low end is wrong. I did the crushed ice with water on the one that is showing 74.7 and indeed it seems off, its showing 28.7-28.2 on the ice cup.

20200319_215749.jpg 20200319_215754.jpg 20200319_215810.jpg
 
Also checked with a glass thermometer and got 80. I guess i can leave it like that since the difference wont really matter.

20200319_220052.jpg
 
Interesting i always heard of jist stirring the icecubes in the water and after 3 minutes stirr again and put the thermometer in.
I'm familiar with the procedure due to working in pro kitchens. If you think about it, you rarely get a"Brain freeze" from a soda with ice, but it almost always happens with a 'slushie' or 'Icee' (At least for me...)
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 19.1%
  • Fish or coral food

    Votes: 5 5.6%
  • Test kits or reagents

    Votes: 8 9.0%
  • Filter media or replacement fleece

    Votes: 5 5.6%
  • RO/DI filters or supplies

    Votes: 14 15.7%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.2%
  • I keep a backup of everything

    Votes: 23 25.8%
  • Other (Post in the comments)

    Votes: 7 7.9%
Back
Top
Home
Post thread…
Market
What's new