Can a timer trigger a feed mode?

[Macca_75]

Hey guys,

I have plugged in an eheim feeder to a powered socket. I have set the socket to use PL3

PL3 is set to use PL2 OR Timer 1

Timer 1 is set to a 4 second cycle

and PL2 is set to Feed mode 2

so the eheim will feed 4 times daily according to Timer 1 AND whenever I press Feed Mode 2.

Is there a way to change it so when either Feed mode 2 OR Timer 1 activates (ie. the ehiem feeds) I can put my 4 streams into "feed mode" to slow them down? (NOTE: The feed mode 2 does slow the pumps and run the ehiem, but I would also like to slow the pumps when the timer activates)

Thanks in advance

 

[Macca_75]

RTFM - it's all clear now

I had to set this field

Timer 1 now triggers a feed mode, the feed mode 1) starts the eheim and 2) slows the pumps.

The feed mode (manually pressed) 1) starts the eheim and 2) slows the pumps.

All good.